Windshield Wiper Arm Assembly Bushings

[RockMJ]

Hey everyone, I have been trying to track down the bushings for the wiper arm assembly for my 90 MJ without luck. My windshield wipers work well on the drivers side but the passenger side barely moves since the bushings are toast on the linkage assembly. Does anyone know where to get these from? I have only been able to find the 97-01 XJ's but I was unsure if they are the same for the older ones. Any help would be much appreciated! Thanks!

 

RockMJ

[Rockfrog]

Used the same bushings for my 88 that I used on my 00 ... exact same bushings for each.

[RockMJ]

Rockfrog, thanks a ton man. I could not find any definitive information regarding the usage between the two. I will order them up. Thanks!

 

RockMJ

[neohic]

DIY Wiper Arm Bushings

 

Part number:

[Rockfrog]

I just picked up the kit from the Help! section at the parts store ... had all i needed no waiting

 

haha ... i was slow ... but yeah, that's the ones i used.

[RockMJ]

Those are the exact ones I was looking at! Sweet!

 

RockMJ

[RockMJ]

I just picked up the kit from the Help! section at the parts store ... had all i needed no waiting

 

haha ... i was slow ... but yeah, that's the ones i used.

 

I will run over to Advance later today and see if they have them. I need a few things for the VW as well so ill look while I'm there. Summit Racing has them if worst comes to worst. Thanks guys.

 

RockMJ

[Minuit]

FYI - the wiper linkages themselves swap over between all years, just not the motors. I used a 99 linkage with my old motor and new bushings and it works well.