jimoshel Posted May 26, 2013 Share Posted May 26, 2013 Has anybody ever mounted a Ford front axle under a Jeep? I recently got a '94 Explorer for the sole purpose of installing the 8.8 rear axle under a MJ. Been looking at it and that axle, front, looks like it would make a good one for a 4wd conversion. Thinking about using both axles for a 4wd conversion. Just wondering. Link to comment Share on other sites More sharing options...
BIGHEEP Posted May 26, 2013 Share Posted May 26, 2013 It is a strange two piece Dana 35 axle that is designed to work in that truck with its suspension design. It would take a huge amount of work to make it fit. The D35 is not exactly known for their strength. XJ D30 axles are cheap and common. Save yourself a headache. Link to comment Share on other sites More sharing options...
mvusse Posted May 26, 2013 Share Posted May 26, 2013 I am (still) in the process of fitting a Ford front axle under my truck, but it's a solid axle Dana 60, not a twin traction beam Dana 35. Link to comment Share on other sites More sharing options...
jimoshel Posted May 26, 2013 Author Share Posted May 26, 2013 This thing looks heavy enough to work under a deuce and half. I'll see if I can't get a pic and or ID it tomorrow. It's got the same shape as the rear 8.8. Link to comment Share on other sites More sharing options...
CoryMJ89 Posted May 26, 2013 Share Posted May 26, 2013 Stay away from the twin beam crap not worth ur time Link to comment Share on other sites More sharing options...
BIGHEEP Posted May 26, 2013 Share Posted May 26, 2013 It's not as heavy duty as it looks. It is a twin traction beam axle not a solid axle. It is a variant of IFS with CV shafts. It looks so big because it is actually part of the suspension system. Link to comment Share on other sites More sharing options...
jimoshel Posted May 26, 2013 Author Share Posted May 26, 2013 Originally I just dropped to one knee and looked under the bumper. This morning I raised it up on a ramp and crawled under it, getting a better look at everything. I'm dropping the whole idea. Link to comment Share on other sites More sharing options...
HOrnbrod Posted May 26, 2013 Share Posted May 26, 2013 Has anybody ever mounted a Ford front axle under a Jeep? I recently got a '94 Explorer for the sole purpose of installing the 8.8 rear axle under a MJ. Been looking at it and that axle, front, looks like it would make a good one for a 4wd conversion. Thinking about using both axles for a 4wd conversion. Just wondering. Does the 94 Explorer have disks on the rear 8.8 Jim? I think they started in 95 IIRC. :hmm: That would be a good swap for your MJ too. Link to comment Share on other sites More sharing options...
jimoshel Posted May 26, 2013 Author Share Posted May 26, 2013 They're drum. Link to comment Share on other sites More sharing options...
Pete M Posted May 27, 2013 Share Posted May 27, 2013 still should be 31 spline and tough as nails. :D Link to comment Share on other sites More sharing options...
jimoshel Posted May 27, 2013 Author Share Posted May 27, 2013 It's a moot point now. I just stuck a couple Ben Franklins in my pocket and watched it disappear down the driveway. Good riddance. Link to comment Share on other sites More sharing options...
TylerJY Posted May 28, 2013 Share Posted May 28, 2013 ewww,,, ttb... Link to comment Share on other sites More sharing options...
Zebvance Posted May 29, 2013 Share Posted May 29, 2013 I call it the...... Scissor axle. I have worked on one from a bronco. A Dana 44. They are pretty strong and perfect for 4wd Pre runner type stuff. Not a terrible axle in general. But it would be a huge task to try to put one under a mj. Even if its the Dana 35 ttb which is what I'm guessing would be under the exploder it would prob be stronger than the Dana 30. If you have the time, tools and know how to do it, it can be done and I personally think it would be awesome. That's just me. If you don't want to invest the time And money just go with the Dana 30. Also I have heard here and there of people finding a certain year waggy Dana 44 and putting it under Cherokees. I guess it's one of the easiest swaps. Haven't done much research on it though. Link to comment Share on other sites More sharing options...
dakal Posted May 29, 2013 Share Posted May 29, 2013 the guy that owned my mj before i bought it, put a chevy 44 in front. its been fun making it work. getting ready to start over with getting it to work. Link to comment Share on other sites More sharing options...
mvusse Posted May 29, 2013 Share Posted May 29, 2013 I'm almost done getting a Ford Dana 60 to work. All that's left is track bar bracket, drive shaft and brakes. Done with steering (I think, still have to double check that), lower control arm mounts, upper control arm mounts, shock mounts and spring plates. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now