jpdriver1 Posted April 4, 2012 Share Posted April 4, 2012 is the front drive shaft the same for all our trucks? 4 cyl vs 6 cyl ? auto vs manual? I was given one and told it was for the 2.5 motor. both my trucks are 4.0 thanks Link to comment Share on other sites More sharing options...
NotMatt Posted April 4, 2012 Share Posted April 4, 2012 I only know 4.0 stuff, not sure on 2.5's with AX5, but... 4.0 with AW4 or AX-15 5spd are the same. 4.0 with BA10 5spd is shorter because the trans is shorter overall. Link to comment Share on other sites More sharing options...
mnkyboy Posted April 4, 2012 Share Posted April 4, 2012 They should be quite a bit different. If you can't use it I would be interested in it,the one in my MJ is bent. Link to comment Share on other sites More sharing options...
jpdriver1 Posted April 4, 2012 Author Share Posted April 4, 2012 mnkyboy --- pm sent Link to comment Share on other sites More sharing options...
Alexia Posted April 4, 2012 Share Posted April 4, 2012 Usually around three inches of differences in the various front drive shafts across all the years of 4.0 4x4 configurations. You can get away with putting the average length in place of a longer one, but that is about it for the extent of swaps. Link to comment Share on other sites More sharing options...
SW86 Posted April 4, 2012 Share Posted April 4, 2012 I went to get one from a 4 cylinder and it was way smaller around. Don't know about length Link to comment Share on other sites More sharing options...
mvusse Posted April 4, 2012 Share Posted April 4, 2012 I know a on a 2.5 with an AX4/AX5 the front driveshaft is a lot shorter than any 4.0 combination. Can't remember the exact difference, but think it might be something like 5 or 6 inches. Don't know about a 2.5/auto combination. Link to comment Share on other sites More sharing options...
jpdriver1 Posted April 5, 2012 Author Share Posted April 5, 2012 great responses all --- THANKS Link to comment Share on other sites More sharing options...
Pete M Posted April 5, 2012 Share Posted April 5, 2012 I only know 4.0 stuff, not sure on 2.5's with AX5, but... 4.0 with AW4 or AX-15 5spd are the same. 4.0 with BA10 5spd is shorter because the trans is shorter overall. actually it's the peugeot and AX-15 that are the same length. The AW4 trans is a bit longer. :thumbsup: Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now