PACIFIER Posted February 21, 2012 Author Share Posted February 21, 2012 Removing the pukegeot. New clutch and master / slave clutch cylinders installed. New pilot AX15 going up NP 231 Front view Rear view Side view Link to comment Share on other sites More sharing options...
PACIFIER Posted February 22, 2012 Author Share Posted February 22, 2012 The rear drive shaft was short by 15", so I had a new one made. Picked it up today and will install it tomorrow along with a new set of 33" silent armor tires and some black steelies. All that is left is connecting the Tcase linkage and figuring out why my speedometer chooses to stop working. Link to comment Share on other sites More sharing options...
ejndssn Posted February 22, 2012 Share Posted February 22, 2012 there notches on the end of the speedo cable that line up to a marker on the TC which should get it to work :cheers: some one on here had pix of them just couldn't find them Link to comment Share on other sites More sharing options...
PACIFIER Posted February 25, 2012 Author Share Posted February 25, 2012 The speedometer issue has been fixed. http://gojeep.willyshotrod.com/HowtoSpeedoGears.htm I also got a chance to work on the interior a little... All that is left is installing the 4x4 shifter, 4.10 gears, fabricating the front bumper, and bedlining the bed. Sooooo close to being done. Link to comment Share on other sites More sharing options...
PACIFIER Posted February 27, 2012 Author Share Posted February 27, 2012 Fixed the brakes (new brake lines & proportioning valve) Link to comment Share on other sites More sharing options...
PACIFIER Posted March 2, 2012 Author Share Posted March 2, 2012 Here is the MJ with the new wheels and tires (33's) Anyone want to buy my 31's? 3K miles on them. Link to comment Share on other sites More sharing options...
89Comanche4x4 Posted March 2, 2012 Share Posted March 2, 2012 Sweeeeeeet!! :wrench: Link to comment Share on other sites More sharing options...
PACIFIER Posted March 3, 2012 Author Share Posted March 3, 2012 I got a chance to cut the fangs, install lights for the rear license plate, and a new stereo today. SWEET! Link to comment Share on other sites More sharing options...
PACIFIER Posted March 5, 2012 Author Share Posted March 5, 2012 First coat is down, the second coat will go on tonight. Link to comment Share on other sites More sharing options...
Rymanrph Posted March 5, 2012 Share Posted March 5, 2012 Sooooo close to being done. What is this "done" that you speak of? Oh, never mind I found the definition: Done - A temporary state of waiting until enough funds have been saved for the next phase of your build. Link to comment Share on other sites More sharing options...
PACIFIER Posted March 5, 2012 Author Share Posted March 5, 2012 Sooooo close to being done. What is this "done" that you speak of? Oh, never mind I found the definition: Done - A temporary state of waiting until enough funds have been saved for the next phase of your build. That's the perfect definition.... :clapping: :brows: Link to comment Share on other sites More sharing options...
PACIFIER Posted March 11, 2012 Author Share Posted March 11, 2012 I got a chance to finish the interior today... :jump: Link to comment Share on other sites More sharing options...
jakeWI Posted March 11, 2012 Share Posted March 11, 2012 rear bumper looks great. not sure I like how far those sliders look to stick down, but that rear bumper is def. awesome. Link to comment Share on other sites More sharing options...
mpace6a Posted March 11, 2012 Share Posted March 11, 2012 Diggin the back bumper, was it just a piece of square tube that you cut, bent, and welded to make the shape? If so what where the dimensions of the tube you started with? Link to comment Share on other sites More sharing options...
PACIFIER Posted March 13, 2012 Author Share Posted March 13, 2012 Finally got a chance to fix the braking issue (rear slides during hard braking) by installing an adjustable proportioning valve. Link to comment Share on other sites More sharing options...
buffalob Posted March 14, 2012 Share Posted March 14, 2012 What is the part number of the proportioning valve please. I can't find it on thier website...... Thank you.....this could help me solve a similar problem. Bob in Denver Link to comment Share on other sites More sharing options...
PACIFIER Posted March 15, 2012 Author Share Posted March 15, 2012 What is the part number of the proportioning valve please.I can't find it on thier website...... Thank you.....this could help me solve a similar problem. Bob in Denver Here is the part number / link where I got mine from. Part# SSBC A0730 URL: http://www.amazon.com/SSBC-A0730-Adjust ... B003EOZM9S Simple fix to a major pickup problem. Link to comment Share on other sites More sharing options...
PACIFIER Posted March 15, 2012 Author Share Posted March 15, 2012 I decided to start replacing all the seals on the MJ (Proactive maintenance) :no: Here are the replacement seals on the t-case (input and output) - Starting point..... Link to comment Share on other sites More sharing options...
PACIFIER Posted March 16, 2012 Author Share Posted March 16, 2012 After a long day at the range, I came home, picked up a beer and came up with this... LMFAO. Link to comment Share on other sites More sharing options...
ejndssn Posted March 18, 2012 Share Posted March 18, 2012 :hmm: are you going to maintain the bright work :rotfl2: btw i do like that :idea: :thumbsup: :cheers: Link to comment Share on other sites More sharing options...
PACIFIER Posted March 18, 2012 Author Share Posted March 18, 2012 :hmm: are you going to maintain the bright work :rotfl2: btw i do like that :idea: :thumbsup: :cheers: For the time being... Yes! I have other rigs to destroy if need be. :D Link to comment Share on other sites More sharing options...
PACIFIER Posted April 3, 2012 Author Share Posted April 3, 2012 Time for an update Bo is now officially a boy I decided to make my doors removable for those hot summer days. Link to comment Share on other sites More sharing options...
Harley Posted April 3, 2012 Share Posted April 3, 2012 Love the truck nuts. :thumbsup: made me laugh. ship me a set haha Link to comment Share on other sites More sharing options...
PACIFIER Posted April 5, 2012 Author Share Posted April 5, 2012 Love the truck nuts. :thumbsup: made me laugh. ship me a set haha No problem.. you pay for the nuts :rotfl2: chain and shipping and I'll hook you up. LMK Relocated the speakers yesterday... It's going to be a nice door-less summer, who needs a wrangler Link to comment Share on other sites More sharing options...
PACIFIER Posted April 7, 2012 Author Share Posted April 7, 2012 Took care of the mirror issue. Set of HD mirrors donated by a friend of mine. Cut the old threaded studs and welded some new ones that fit the diameter of the door hinge. Done... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now