my lowered jeep

[lower jeep]

ok so i havent updated lately, i got the 5 speed aisian transmission in :D , it wasnt that bad of a swap to do :cheers: , I'm starting to build a stroker motor for the truck found out the Nova leafs won't fit. :headpop:

[BIGHEEP]

I am bumping this to find out what springs you used up front to lower your MJ?

[Tank4L]

bump for pics

[lower jeep]

to answer a few question ive seen the front is lowered by a old set of Warn winch springs. i found them in Canada over 3-4 years ago brand new i don't know where you can find them at any more ive done research on these but couldnt find any thing about them.

 

My jeep right now is half way torn apart waiting to get put back together after a new paint job it is know a bright green with a soon to been flat black hood and Dodge Duster style stripes on the sides

 

the rear is getting air ride put onto it slowly so far i have the 8 inch c notch welded in and will be welding the 4 link in soon so the truck will lay the frame on the ground

 

will have pics as soon as the 4 link gets put in

 

thanks for the intrest

[Pete M]

Can we at least see pics of the pile of parts? :brows:

[lower jeep]

pics will be up tomarrow depending on weather have the 4 link welded in and the bag mounts and bags installed just have to air it up and push it out of the garage :D

[lower jeep]

here's some pics of my truck now

aired up

then aired down with bed not bolted down need to cut out the wheel wells on the bed

[JeepcoMJ]

can't wait to see the end results. THANK YOU for cutting the tail gate back out...i didn't like it molded in.

 

any pics of the rear axle?

[jtdesigns]

That front axle won't tuck to well huh?? I like the progress so far.. Shaved, sectioned and slammed on air.... Nice.....

[mvusse]

I'm guessing interference between the axle and oil pan. Maybe use S10 parts or other independent front suspension.