landlubber Posted November 1, 2010 Share Posted November 1, 2010 looking for a crossmember for a AX-15, closer to NH the better. thanks. Link to comment Share on other sites More sharing options...
Unglar Posted November 2, 2010 Share Posted November 2, 2010 I pulled an ax-15 at the jy and the crossmember looked exactly the same as the one on my peugot? is there a difference? Link to comment Share on other sites More sharing options...
Geonovast Posted November 2, 2010 Share Posted November 2, 2010 The AX-15 crossmember is dipped down in the middle about an inch compared to the other one. Sorry for the crappy pics, I'd take some better ones personally if I could, but this is the best Google has to offer. AX-4/5, Pukey, AW-4, TF whatever AX-15 Link to comment Share on other sites More sharing options...
Unglar Posted November 3, 2010 Share Posted November 3, 2010 Ack, so I need to go pull a cross member from the JY when I get around to replacing my peugot with this ax-15? Link to comment Share on other sites More sharing options...
landlubber Posted November 7, 2010 Author Share Posted November 7, 2010 still looking, anyone have one? or know of any JYs where i'd have luck in NH or MA? Link to comment Share on other sites More sharing options...
landlubber Posted November 12, 2010 Author Share Posted November 12, 2010 best I can find is one in Indianan for $150. anyone got one? Link to comment Share on other sites More sharing options...
Unglar Posted November 12, 2010 Share Posted November 12, 2010 Is that including shipping? I wonder what shipping is, cause I am pretty sure they are only like $10 at the pulla part. Link to comment Share on other sites More sharing options...
landlubber Posted December 7, 2010 Author Share Posted December 7, 2010 still nothing. anyone help me out? Link to comment Share on other sites More sharing options...
mjeff87 Posted December 7, 2010 Share Posted December 7, 2010 until you can find one, you can use a 1/2" transfer case drop kit with a "regular" xmember to make up the difference..... (basically stack 1/2" worth of washers between the xmember and the framerail and use some longer bolts ;) ) Jeff Link to comment Share on other sites More sharing options...
Geonovast Posted December 8, 2010 Share Posted December 8, 2010 Using washers as a T-case drop can work, but I would drive carefully with it that way. You're greatly reducing the surface are that the crossmember has to push against the frame. Not saying you have to granny it, just don't pound on it. Link to comment Share on other sites More sharing options...
MJRemi Posted December 13, 2010 Share Posted December 13, 2010 I'm in the same boat. I need to find a AX15 crossmember. I did see an adapter plate on Advance Adapters website that states it attaches to the BA/10 crossmember to specifically mount the NV3550 tranny. Isn't that the same as the AX15? The item # is 716007. Has anyone tried this adapter plate? Link to comment Share on other sites More sharing options...
waggy Posted December 14, 2010 Share Posted December 14, 2010 i have one , but i am in toronto , shipping might be a little steep .. Link to comment Share on other sites More sharing options...
landlubber Posted December 15, 2010 Author Share Posted December 15, 2010 How much is steep? I'm in new hampshire, 03054 Link to comment Share on other sites More sharing options...
lostissues Posted February 13, 2011 Share Posted February 13, 2011 for junk yards check Car world in Candia, I think I will have to go and get an ax15 cross member once the snow clears also. Link to comment Share on other sites More sharing options...
landlubber Posted March 2, 2011 Author Share Posted March 2, 2011 for junk yards check Car world in Candia, I think I will have to go and get an ax15 cross member once the snow clears also. I did before snow hit, no luck. let me know if you run across any that you aren't claiming yourself. Link to comment Share on other sites More sharing options...
landlubber Posted April 23, 2011 Author Share Posted April 23, 2011 for junk yards check Car world in Candia, I think I will have to go and get an ax15 cross member once the snow clears also. I did before snow hit, no luck. let me know if you run across any that you aren't claiming yourself. Went to candia a bit ago, no luck. Was going to go today but it was pouring. Still looking, would rather get the right crossmember now as opposed to running something rigged and less strong/sketchy. Link to comment Share on other sites More sharing options...
lostissues Posted April 23, 2011 Share Posted April 23, 2011 for junk yards check Car world in Candia, I think I will have to go and get an ax15 cross member once the snow clears also. I did before snow hit, no luck. let me know if you run across any that you aren't claiming yourself. Went to candia a bit ago, no luck. Was going to go today but it was pouring. Still looking, would rather get the right crossmember now as opposed to running something rigged and less strong/sketchy. went there last week, all they had were automatics. Link to comment Share on other sites More sharing options...
landlubber Posted April 24, 2011 Author Share Posted April 24, 2011 Thanks for the info, save a trip then. Link to comment Share on other sites More sharing options...
landlubber Posted April 30, 2011 Author Share Posted April 30, 2011 Found one on craigslist, picked it up today. Link to comment Share on other sites More sharing options...
Recommended Posts