wannabeMJ Posted August 8, 2010 Posted August 8, 2010 from wiki: Jeep XJs came in several standard gearing ratios: 3.07:1, manual transmission, I6 engine. 3.54:1, automatic transmission, I6 engine with Dana 44 rear differential. 3.54:1, manual transmission, I4 diesel engine with Dana 35 rear differential. 3.55:1, automatic transmission, I6, V6 engines; manual transmission, I4 engine. 3.73:1, automatic transmission, I6, Tow Package, UpCountry Package. 4.10:1, manual transmission, V6; automatic transmission, I4 engine. 4.56:1, automatic transmission, I4, offroad or tow package. can some one confirm this for the MJ's
Pete M Posted August 8, 2010 Posted August 8, 2010 rules of thumb for 87-92 MJs 4.0 + auto = 3.55 4.0 + stick = 3.07 2.5 + auto = 4.56 2.5 + 4spd stick = 3.55 2.5 + 5spd stick = 4.10 uber rare fuel economy package = 3.31s rules of thumb for 86 MJs metric ton = 4.10s beyond that, ya really gotta check to know for sure.
wannabeMJ Posted August 8, 2010 Author Posted August 8, 2010 no known knowledge about the V6 2.8l gears??
freakjeep93 Posted August 8, 2010 Posted August 8, 2010 rules of thumb for 87-92 MJs 2.5 + auto = 4.56 . does this apply to xjs to? ive got the rear end out of a xj that had a carbed 2.5 with an auto tranny and 4wd. wiould it have 4.56's?
freakjeep93 Posted August 8, 2010 Posted August 8, 2010 it had a carbed 4 cylinder so i think thats before 87?
Eagle Posted August 8, 2010 Posted August 8, 2010 An XJ with the carbureted 2.5L may have 4.56s, or it may have 4.10s.
freakjeep93 Posted August 8, 2010 Posted August 8, 2010 okay ill have to check sometime. only thisng is its buried under about 3 other axels in the bed of a parts mj
Eagle Posted August 8, 2010 Posted August 8, 2010 I have the remains of an '86 2.8L automatic (XJ) that has 3.73 gears under it.
wannabeMJ Posted August 9, 2010 Author Posted August 9, 2010 all right means Ill have to open mine up to check on this and Ill post up the results soon
deziped Posted August 9, 2010 Posted August 9, 2010 Junked out a 86 w 2.8 that was auto with OE D20 rear & 4.10's. It was 2 wd.
wyk Posted August 9, 2010 Posted August 9, 2010 no known knowledge about the V6 2.8l gears?? My 4X4 5spd 2.8 has 4:10's. Looks like a D35 in the back to me. Oh, btw, I am swapping the oil tomorrow, should I get a gasket from the Jeep dealer or use the goopy stuff?
kastein Posted August 9, 2010 Posted August 9, 2010 rules of thumb for 87-92 MJs 2.5 + auto = 4.56 . does this apply to xjs to? ive got the rear end out of a xj that had a carbed 2.5 with an auto tranny and 4wd. wiould it have 4.56's? might, but it'll probably be a d35 so I wouldn't run it. FYI - the 20 rear axle is an AMC 20 not a D20. A D20 is a nifty twin-stickable gear driven transfer case, as I recall.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now