Bounty Hunter Posted March 9, 2009 Posted March 9, 2009 I have a 62mm Performance Throttle Body for sale, $95. Great power and mileage improvements, and throttle response becomes lightning quick. You can email me at bountyhunter AT sija.org if I don't catch a post here. :banana: For '91-'04 2.5L and 4.0L engines. On top is a stock 55mm TB from a 4.0L, below it is the 62mm TB.
Bounty Hunter Posted March 9, 2009 Author Posted March 9, 2009 I also have a matching 62mm smooth bore spacer, $50 with hardware.
Bounty Hunter Posted April 16, 2009 Author Posted April 16, 2009 Btt, get it before it gets snatched up on Ebay. :popcorn:
Oizarod115 Posted April 18, 2009 Posted April 18, 2009 arr! i want it but i don't have money this week. hope it sells, BUMP
Bounty Hunter Posted April 18, 2009 Author Posted April 18, 2009 Check back when you have the $$, never know. Thanks.
Bounty Hunter Posted May 19, 2010 Author Posted May 19, 2010 I have several available, clean and like-new condition.
jpnjim Posted May 19, 2010 Posted May 19, 2010 Any chance you can use bore out a Renix style TB to 55mm, and use the old HO blades that were removed? :idea:
Bounty Hunter Posted May 19, 2010 Author Posted May 19, 2010 I haven't looked closely at the Renix 4.0L TB to see what needs to be done. I think Hesco does it so it's likely possible. Send me one if you have an extra, and we will see what can be done.
Bounty Hunter Posted May 19, 2010 Author Posted May 19, 2010 Interested in trading for anything? Rob L. Depends on what you have, I just picked up an '89 shortbed MJ so if you have anything that fits.... Keep in mind that similar 62mm throttle bodies retail for $350-$400.
Jeepman Posted May 19, 2010 Posted May 19, 2010 Keep in mind that similar 62mm throttle bodies retail for $350-$400 Yes But those are New Not bored out... Did you Just bore this to sell or did you remove it from your Jeep?
Automan2164 Posted May 19, 2010 Posted May 19, 2010 Interested in trading for anything? Rob L. Depends on what you have, I just picked up an '89 shortbed MJ so if you have anything that fits.... Keep in mind that similar 62mm throttle bodies retail for $350-$400. I have a whole '92 SWB MJ for parts. I am taking the drivetrain and wiring harness, but the interior, axles, springs, and body as a roller will be up for parts/whole sale. Need anything? Body is pretty beat up, but minimal rust. Rob L.
Bounty Hunter Posted May 19, 2010 Author Posted May 19, 2010 Yes But those are New Not bored out... Not all. I have these professionally machined to sell. Harvard is way up there, I'm south of St. Louis, or I'd consider some drivetrain parts. Thanks though.
Automan2164 Posted May 19, 2010 Posted May 19, 2010 Yes But those are New Not bored out... Not all. I have these professionally machined to sell. Harvard is way up there, I'm south of St. Louis, or I'd consider some drivetrain parts. Thanks though. Hmm. I don't have the cash, but could really use one of those... Keep me posted if there is anything you need. Sounds like you sell these for side cash, do you usually always have a couple around? Rob L.
Bounty Hunter Posted August 3, 2010 Author Posted August 3, 2010 Yes, I usually have a few on hand, as well as spacers.
pug Posted September 16, 2010 Posted September 16, 2010 Do you have anything for the 2.5 tbi. Would it benefit or a waste.thanks
Bounty Hunter Posted September 16, 2010 Author Posted September 16, 2010 Sorry, '91-'04 MPFI only. I've had the TB apart on my '89 2.5L and I don't think there's enough material there to bore it larger.
Bounty Hunter Posted September 17, 2010 Author Posted September 17, 2010 Not for that motor, although it's probably more of a possibility than boring the TB. Let me take a look at it.
Bounty Hunter Posted October 29, 2010 Author Posted October 29, 2010 Btt, '91-'95 62mm throttle bodies and '91-'04 62mm spacers available.
Bounty Hunter Posted October 29, 2010 Author Posted October 29, 2010 where in So Ill are you? Just south of St. Louis on the IL side. Where are you?
Bounty Hunter Posted February 15, 2011 Author Posted February 15, 2011 62mm throttle bodies and matching 62mm TB spacers still available.
BEATNGU Posted September 2, 2011 Posted September 2, 2011 62mm throttle bodies and matching 62mm TB spacers still available. PRICE PLUS SHIPPING TO 37917 FOR BOTH.... :ack:
Recommended Posts
Archived
This topic is now archived and is closed to further replies.