AZXJ

2 black XL long sleeve with tan logo, please. Dave

Changed the website quite a while ago so those links are no longer active.. Here's one of the MJ that I never finished. Here's some of my current MJ build

When: May 6th thru 10th Where: Pyeatte Draw Who: Any Cherokee based Jeep is welcome. :cheers: Here's your early notice! So request vacation time NOW!! Dave

No, no bump steer at all..

Customers rig.. :D two horns and vac cannister.. The adjustment is at the TRE .330 wall Dom tapped for 1 ton ends.

There are about 150 Rock Halo's running the Arizona Rocks!! Not one has come back!! We also do 3/8's thick covers and have had 0 complaints. Dave

Just make sure you use new U joints in the driveshaft and the pinion angle is properly set. The minute Offset won't hurt anything. We have a master cylinder mod that you may be interested in after you get it all done.

Just finished this setup on a customers rig

http://www.desertfab.com/shopping/index ... roductId=2 $65.00 +$8.00 shipping

standard 1310 U-joint. Just remember to not tell the parts guy your doing any sort of swap.. it just confuses them.. :nuts:

We can hook you up with RK or RE for around a grand.. shipped.. Here's a link to a shot of the RE kit.. sets you up spring over in the rear with your stock leaf pack.. http://www.desertfab.com/shopping/index ... ductId=286 Dave 480-288-4213 Http://Desertfab.com/

Any interest in PitBull's ?? Dave 480-288-4213 Http://deserfab.com/

RK now runs Poly at the axle end and Hiem on the unirail mount.. much better design and alot less noise. In my opinion, long arm will make for better on road driving and for the occasional wheeling you do with the MJ you'll have more then enough travel to handle any situation. Dave Http://desertfab.com/shopping/

just spend the money and do it right the first time.. if you know how to set up gears then you shouldn't have a problem.. if your just doing the used gears to learn then I'd recommend picking up a used axle and start with that.. Take care Dave Http://desertfab.com/shopping/

Try running an RS9K shock or MX6 adjustable shock to control body roll with the camper..