rylee144

are you looking for the bracket that mounts to the tunnel? if so i have one you can have for the price of shipping. prolly only be 5 bucks these are nice too https://www.amazon.com/Stainless-Cherokee-transfer-linkage-Comanche/dp/B01N5RCB2B/ref=sr_1_3?crid=33WVFD4AP1BGX&dchild=1&keywords=azzy+linkage&qid=1623113474&sprefix=azzy+link%2Caps%2C302&sr=8-3

$100 for a bench and two buckets in WA https://seattle.craigslist.org/tac/pts/d/puyallup-cherokee-xj-and-comanche-seats/7377583232.html

I used a floor jack and a buddy to hold it old there as it was lowered. Worked fine. Took two of us to lift the new one back into position as we couldnt get the angle right on the jack

What I currently have

Thx!

I don't have the original gears. Axle came with the locker in it. Had time to do some reading. Some suggest the brake calipers could be the culprit. Not sure how that works tho. Most testing to come

Ugh the clunk remains! Wheel bearing feels real good though so that's nice. Are putting the stock gears back in the dana 30 hard? Thinking about ditching this locker.

You'll need the mount that attaches to the transmission. The one that also has the exhaust mount on it.

Got new ball joints, wheel bearings and a u joint in the axle shaft. The u joint was toast just rust left inside. The wheel bearing had alot of wobble in it. Lastly the top ball joint was so tight I couldnt get the rod to move even with a big hammer. I think that was my problem but it could have been all of it. Putting it back together today then a test drive. 🤞

How well do they keep water out of the bed? Easy to roll up to use the bed? Thx for the info

Not quite done yet, ran out of stone. Replacing wheel bearings, ball joints and a u joint on the MJ next while i wait

Bit of a drive beast lol

I'm not positive it's the locker that's causing the clunk. I'm about to throw money at it its driving me nuts

It appears I have some rubbing at full lock.

My glock 17 with TLR light, Tijicon RMR optic.

from google. mine also has the .22 mag cylinder

free MJ in Yakima WA https://www.facebook.com/marketplace/item/984375772393457/?ref=search&referral_code=marketplace_search&referral_story_type=post&tracking=browse_serp%3A1dbbe8f3-2b10-4e92-9d0c-4dc0e776987c

That's a steep driveway

Lol.

I used to have a HP but sold it in my foolish youth. I have several glocks, a kimber 1911, a S&W shield and a colt .22 peacemaker(sweet little gun). Also numerous rifles and shotguns

If I disconnect the axle in loose 4wd right?

I have a constant grinding sound coming from the front tire area. I lifted the truck and could move the wheel back and forth a little. Is that the wheel bearing indicating its worn out? What brand is a good price/quality? Secondly, I'm getting really tired of the front locker clunking in low speed sharp turns. Really embarrassing in parking lots. Anything I can do? Thanks!

Turbines with caps $100 in WA https://www.facebook.com/marketplace/item/898030587593955/?ref=facebook_story_share

Part out in Sacramento https://sacramento.craigslist.org/pts/d/sacramento-jeep-comanche-parts/7343081110.html