Jackrabbit41

Everything out The first cylinder has 2 groves in it. Doesn't look good so hopefully they can be fixed Sent from my iPhone using Tapatalk

Get rid of it before it comes off and you die lol.

I'm I'm this jeep Cherokee face book group and I like it but there's so many people that just hate on you and tell you that you can't do it. It gets so annoying. I was asking a question apart tearing about my motor and some guy tells me that I shouldn't be doing this by myself. It really pissed me off

Trying to stay organized Sent from my iPhone using Tapatalk

Damn it rough country! The wrong end came disconnected!!! Lol. Today when I was driving I heard a pop and then when I was at the local hardware store a guy asked "what's that thing hanging down by the diff?" It was the RC away bar disconnect. The bolt came out of the top. Weird because it had a lock but on it. Yes it was probably my fault but everything I've ever had that was rough country has just been $#!& Sent from my iPhone using Tapatalk

I need to do some research because I don't know what I need to keep and what needs to stay in order. I'm labeling everything very well so that I can put it all back if needed though. I've never been inside any engine so this is all new. I know what everything is but I still feel lost lol. It's a lot of fun though Sent from my iPhone using Tapatalk

Sent from my iPhone using Tapatalk

The guy that told me that was a old guy at the hardware store lol. But when he said that it seemed crazy to me but I believed him

Getting the mount machined so the slots are longer so it'll fit my motor Sent from my iPhone using Tapatalk

It needs to go about 1cm wider so I'm having a friend at school use the mill to widen the slot

I used 5 inches but they were a little long so I'm gonna try 4 inch grade 8s tomorrow

Back in September I out a motor on a motor stand no trouble but now, I have a different motor stand and the thing can't go wide enough to fit all 4 on the motor so i tried 3 and my grade 5 bolts all bent lol. The hardware store guy said grade 5 cus grade 8 would snap.

thanks

So I got a 89 renix and I'm gonna start tearing it apart so I can take it to get machined. I know there's a stroker forum but I just don't wanna make an account at the moment so sorry y'all. My questions is, when taking out the insides, what should I keep? I'm doing a 4.7l. What can I junk and what do I need to keep organized to use later? Thanks

I need to get some bolts to put my motor on its stand, what's the thread in a 89 renix? I want to get like 3 or 4 grade 8s

Well today I picked up a 89 renix and over this summer very slowly I will build it up into a 4.7 stroker. Can't wait. Motor has 121000 on it and it came with everything. Got it for only 150$!! But loading it was very tough because the cherry picker was broken. Took 2 hours lol The kids dads wrangler was dope too Sent from my iPhone using Tapatalk

Thanks guys. I got it for 150$! It's in good shape too

I'm texting this guy and he wants me to give him a price. All I know is it's a 89 renix, it ran when pulled and has everything on it.

Ya I found a guy that has a 89 renix that I think I'm gonna pick up soon. I'm so excited to start. I've been doin some reading but I need to do a lot more lol.

So I'm trying to find a 4.0 to build a 4.6 or 4.7 stroker out of and I'd like to stay renix. Do many people stroke renixs? I just don't really wanna deal with swapping to HO. Or should I? Also renixs were in 87-89 right? Thanks yall

This is one of my favorites

Lol o have the same thing. It gets really Hot though. The engine heat comes up through it

Could you recommended one? So many options

Thanks, I'll look into it

So i really want to build a bed cage and head rack. I want a cage mostly for tree protection, but also for roll overs (i hope to god that'll never happen). I used some schedule 40 pipe to make a friends bumper and my harbor freight bender worked amazingly on that. It did a 40 degree bend with no kinks or dents. I was going to use schedule 40 for my cage, but then i thought to my self that i wanna look back on the cage and know its built right and strong. I wanna do it right the first time. Just wondering what kinda bender y'all have/use and if anyones tried bending dom on a harbor frieght bender? I'm gonna try it but I just don't wanna waste money on DOM. Thanks and if anyone has any pics of their cages, that'd be awesome.