Jackrabbit41

My truck came with these rims and I've always wanted center caps. Anyone have any idea what they are and what caps will work for me? Thanks y'all Same rims in the different pics. Just different stages of my build Sent from my iPhone using Tapatalk

Dope bro

Could be wrong wheel bearings. I had that problem and my rotors were rubbing on the upper ball joint arm thing and grooving them. I couldn't move

I got stock steering with 5.5 inches of lift and 33s. I go wheelin every so often and never have had any problems on or off road

I fixed the fender and it turned out pretty good. Didn't take long either Sent from my iPhone using Tapatalk

So found this Datsun near by and I really want to flip it and try to earn some cash. http://seattle.craigslist.org/see/cto/5671747126.html Needs fuel pump, fuel lines and a slave cylinder. I talked to the guy and he says that he can show me it runs but it won't run for long because no fuel pump. He also says he'd give it to me for 600$. 80,000 miles so I bet the motors fine. He's about 3 hours away so I'd have to borrow my dads Silverado and u haul trailer it home. Do y'all think it's worth it? I'd love to make a few extra bucks and have fun working on another car at the same time. Never flipped a car but I have all the tools to do it. He also says interior is perfect except for a rip in the dash

The po put in my weird some lights and had a weird ground wire going to the fuse box. I just unplugged it and put it back in then the lights started workin lol.

Last September I pulled out my carpet and cut out most of the foam backing material up the fire wall. Road noise increased but it wasn't terrible. My jeep leaks a little so I didn't want it getting trapped in with carpet. I went until about a month ago when I bed lined my floor boards with Herculiner. It helped with heat. A lot of heat off the tranny comes through the floor board but it's not to bad. I'd recommend Herculiner

Id like to do this as well, because I've blown my up twice

So none of my interior lights work other then the gauges. Even when I turn the knob nothing comes on. I haven't looked at the fuses yet so could be that but just wondering what y'all think I should do if the fuses are good. Even the glove box light ain't workin

Ya my ba10 was fine but the internal slave started going out so I swapped in an external Ax15

Sweet. 300$ ain't to bad for something that runs

Hey check out my new website Jencoautoandfab.com

Almost got the gap closed. I've been using a 2x4 and twisting it in between the "frame" and the inside of the fender to push it out

Sent from my iPhone using Tapatalk

Lol ya. I'm gonna pull it off and try to bend the mounting brackets back so that it'll push it back out

Came out to the jeep after I got down with a spike ball tournament at a local park and someone hit me. Door won't open and fenders bent Sent from my iPhone using Tapatalk

So for months my sway bar has been hitting my cool springs and frame and it makes a horrible knocking sound. Then a few weeks ago I took a corner and one of my links sheared off (aftermarket rich country's). Then yesterday at walker I disconnected my sway bar. I forgot to connect it back up on the way home, but didn't notice a difference. It felt fine. Yes, with a load in the bed, it'll be different but I just took the damn thing out. Make I'll get a new one or the anti rock kit. Sent from my iPhone using Tapatalk

Lol nope. I thought about making a new link for it, but whatever. It's fine Sent from my iPhone using Tapatalk

Just swapped in a new rear brake line. This ones a lot better. I still just zip tied it on though [emoji51] Sent from my iPhone using Tapatalk

Went to walker valley last night, stayed the night, and wheeled this morning. I only hit to trails. Easy crossing and ridge Rams. Had a lot of fun. Didn't get any pics lol. All of the gates were closed so I had to go around one of them. I almost blew out a taillight, but luckily I just hit clay!

Sucks. There's lots of them out there though... Ya, I'm just trying to get one for less then 150$