Bill

Thank You !

https://cults3d.com/en/3d-model/game/jeep-comanche-1984-printable-car-front-body-and-pickup-trolly I had thought for a while it would be fun to have a model of my Comanche and I saw recently people sell files to use in 3D printers to make pieces for making a 1/24 scale model pretty easy and kind of fun. The link above will get you to where you can buy the file for $6.00 and then you can go to CraftCloud.com and they will print the file and mail you the pieces. There are other Jeep Comanche files from other sources in different size scales too. One of the nicer and more detailed Comanche files though has a flaw, the rear wheel wheel opening isn't centered on the bed so maybe watch for that before choosing which place to get your printer file. Anyway, I combined these parts with a Jeep Wrangler model this scale to get the Rubicon Moab wheels, axles, engine, etc. and I ordered a 3D printed dash, steering wheel and inside door panels from a different Comanche file you can also find easy online. I hadn't made a model in many years, since I was a kid and I sure made a lot of mistakes while painting and having sticky fingers from the glue, this is very far from perfect but it still looks cool on my desk I think. I hope this helps a little if anybody else was thinking about having a mini desk top Comanche too.

https://www.facebook.com/marketplace/item/257016383404704/

If you are still looking here is a sport bar in Illinois for $550 https://www.facebook.com/marketplace/item/303775668896259/?ref=browse_tab&referral_code=marketplace_general&referral_story_type=general&tracking={"qid"%3A"-3453586635399914734"%2C"mf_story_key"%3A"991842646236760874"%2C"commerce_rank_obj"%3A"{\"target_id\"%3A991842646236760874%2C\"target_type\"%3A6%2C\"primary_position\"%3A47%2C\"ranking_signature\"%3A7298056584536522752%2C\"commerce_channel\"%3A501%2C\"value\"%3A0.00041557964144795%2C\"upsell_type\"%3A3523%2C\"candidate_retrieval_source_map\"%3A{\"7333879899961706\"%3A3021}%2C\"grouping_info\"%3Anull}"%2C"lightning_feed_qid"%3A"-3453619414525260733"%2C"lightning_feed_ranking_signature"%3A"7298056584536522752"%2C"ftmd_400706"%3A"111112l"}

https://www.facebook.com/marketplace/item/303775668896259/?ref=browse_tab&referral_code=marketplace_general&referral_story_type=general&tracking={"qid"%3A"-3453586635399914734"%2C"mf_story_key"%3A"991842646236760874"%2C"commerce_rank_obj"%3A"{\"target_id\"%3A991842646236760874%2C\"target_type\"%3A6%2C\"primary_position\"%3A47%2C\"ranking_signature\"%3A7298056584536522752%2C\"commerce_channel\"%3A501%2C\"value\"%3A0.00041557964144795%2C\"upsell_type\"%3A3523%2C\"candidate_retrieval_source_map\"%3A{\"7333879899961706\"%3A3021}%2C\"grouping_info\"%3Anull}"%2C"lightning_feed_qid"%3A"-3453619414525260733"%2C"lightning_feed_ranking_signature"%3A"7298056584536522752"%2C"ftmd_400706"%3A"111112l"} This one is in Illinois for $ 550

Facebook Marketplace has a long bed roll bar for $550 https://www.facebook.com/marketplace/item/303775668896259/?ref=browse_tab&referral_code=marketplace_general&referral_story_type=general&tracking={"qid"%3A"-3453586635399914734"%2C"mf_story_key"%3A"991842646236760874"%2C"commerce_rank_obj"%3A"{\"target_id\"%3A991842646236760874%2C\"target_type\"%3A6%2C\"primary_position\"%3A47%2C\"ranking_signature\"%3A7298056584536522752%2C\"commerce_channel\"%3A501%2C\"value\"%3A0.00041557964144795%2C\"upsell_type\"%3A3523%2C\"candidate_retrieval_source_map\"%3A{\"7333879899961706\"%3A3021}%2C\"grouping_info\"%3Anull}"%2C"lightning_feed_qid"%3A"-3453619414525260733"%2C"lightning_feed_ranking_signature"%3A"7298056584536522752"%2C"ftmd_400706"%3A"111112l"}

This maybe isn't what you're looking for exactly if you want completely OEM but last year I was looking for the same thing and wasn't having much luck finding a used Comanche Dana 44 so I ended up ordering a new Dana 44 from East Coast Gear. It's some more expensive of course but in the end everything is brand new and has the correct mounts so it's super easy to install and if you want a locker or limited slip they will install it with whatever gear ratio you want. They offer to add rear disk brakes installed also if you want that come with correct cables for our Comanche parking brake. They even came with new U-bolts for the springs and the plate that the U-bolts and shocks mount to. They come shipped in a sturdy crate with a great looking powder coat finish. I maybe sound like I'm advertising for them but I was sure pleased with the axle I got from them, their customer service and I really like it and how easy it made to upgrade to a Dana 44 and rear disk brakes if you want them.

I recently replaced my Transfer Case Detent also, on a late 1992 model (Bolt was REALLY rusty and spring weak) and didn't find a used one but ended up finding some new ones on the internet. The 5/8" bolt I found on Mopar Parts Giant part# 04886473-AB, I also got a new detent pin from them, (part # 5300 8217) and spring (part# 0463 8497). If you didn't find a used one yet and still looking I hope this helps. Bill

I just installed my Sport Bar with the new brackets I got from you, they fit perfect ! Thank you so much for making these.

https://www.ebay.com/itm/195835878505 I just saw these posted on Ebay earlier but when I checked just now they were already gone but maybe the listing will still be helpful for getting the part # to make searching easier, Good luck !

Hi ! Do you have any Roll Bar brackets left ? I'd like a set if you do. Thanks !

Does anyone have a NOS Crank Position Sensor Mopar # 4638 128 that they would be willing to part with? It's for a 1992 Comanche with an Automatic and the 4.0 Got lucky and found one on Ebay !

https://www.oraclelights.com/blogs/news/mj?fbclid=IwAR09f64FN3LmuoE0UakM8puzcEevzpZHgl9UGZycUkQs4xqPyoSqNZ93g0M I just saw these advertised on Facebook. Aftermarket Comanche tail lights

Ha ! You sure do have a few ! Would you sell a light grey colored one?

I am missing the approximately 1/2" diameter light grey plug from my Comanche's interior, it's goes right above the lights on the side walls. If you have one you'd be willing to sell just let me know how much, Thank You !

They sell both, complete MJ Comanche axles like what I bought from them and also just shafts if that's all you want. They have a great website to check out how much it is for what you want exactly. I thought their prices were very reasonable for what you get, especially after I received mine.

I was looking for a Dana 44 awhile back too and didn't have much luck in my area but I found East Coast Gear and ordered one from their website. You can even have them install rear disk brakes on it ( I did ) and you can choose the 3.55 gear ratio you want and even have them add trac-loc or whatever locker/limited slip you want. They do such a great job I think, the axle comes in a crate painted really nicely, the brake lines are already installed and all the seals and everything are new so it will be easy to install and trouble-free for many miles! They even included new U-bolts to install it. I am really happy with mine and thought I'd mention this option if you haven't found an axle yet.

https://www.facebook.com/groups/339415879775306/permalink/1755864414797105/?sale_post_id=1755864414797105

Cool someone also from North Dakota bought this, congratulations! I don't often see fellow Comanche drivers around here, I live in Minot.

https://www.facebook.com/marketplace/item/1132697433986196/?ref=browse_tab&referral_code=marketplace_top_picks&referral_story_type=top_picks Not mine but I wish it was... it's even where I live ! I just saw this pop up on facebook a few hours ago and thought somebody here should have this ! It's in Minot, North Dakota

COOL !

Got mine in the mail today, looks great, nice job ! Thank You !

Sounds Great ! I'd like one, I'll message my address, just let me know how you'd like payment. Thank You !

Great idea ! If you aren't burned out on making them yet and have one more for sale I would sure like one.