HOrnbrod

Factory leaf spring bolts are p/n 34202118. Specs are M14 x 2.0 pitch x 120mm long, class 10.9, flange head, nipple tip.

Do you have a tranny oil cooler? If so the return line rubber end w. the 4-prong metal quick-connector plugs on the oil cooler hard line. If no oil cooler, this return line connector connects to the metal hard line that comes from the top radiator bung hole.

624300 is the correct Dorman p/n (return hose) for your rig. Are you sure you don't need the pressure hose instead? Or maybe a previous owner "modified" your lines. Dorman/Help numbers Pressure Hose 624301 Return Hose 624300 Metal tube 624334 Fittings at Tranny 800714

No biggie Pete. Thanks for checking into it. :cheers:

There would still be the hub-centric problem. I don't know, maybe I'm too anal about stuff like this (brakes too), but even Spidertrax has the disclaimer of "offroad use only" for their hub-centric spacers. I know it's a liability thing, but I researched long and hard before I used those.

Jeff, did you pull one of the wheels and look on the inside? Usually the mfg, p/n, BS, etc. is stamped there.

Doesn't work Jeff. You owe ME a beer. And not that lime crap either. :cheers: :yes: :yes:

NAXJA and the Strokers Forum (the two I'm on the most) take you back automatically after you log in. phpbb based? I think so?

When not logged in, you press the "Post Reply" button at the end of a thread. It then takes you to the log in screen, then after logging in it goes to the home page, not back to the thread you are trying to reply to like every other forum I'm on does. Make any sense Pete?

Yes, same conditions for me.

I see you have learned how to edit. You're improving shipmate. :rotf: BTW, see the disclaimer on these adapters? Disclaimer: Billet Adapters are provided "as is" without warranty of any kind, whether express or implied. Billet Adapters are intended to be used ONLY on a show vehicle, stylized for a special look and NOT intended to be used on long driving, freeway driving and every day driving. Under no circumstances will s.w.o llc. Inc. be liable to any party for any direct, indirect, special, incidental, consequential, or other damages based on any improper use. :eek: :eek: :eek: No thanks................

And what might those be Bo? I'm only counting five holes and studs. :hmm:

:yes: = joke. :roll: Be thankful you have the AMC20. Wish I did.........

Don't believe all the above. The AMC20 axle is junk and should be scrapped. Nothing but a boat anchor. So where do you live? I'll come get it. :yes: :cheers:

No luck. Whebever I hit the Post Reply button, it always takes me back to the home page. Cookies cleared every day. :hmm: :dunno:

Can't sleep either, and I'm very far from a newborn. :yes: Congrats, and enjoy 'em while they're young. :cheers:

Point taken. Profile altered. :cheers:

Long live Harmilda.

:clapping: If Mnkyboy can post up his location, how 'bout the rest of you zeros do the same in your profile? Huh?

It's only an inch narrower Pete, easily correctable by SpiderTrax IF it were not for the 6 x 5.5" axle pattern. Isuzu axles are plentiful down here w. 4.10 and up ratios, and my Exploder disks will work fine on if I needed to use them. Another IF: If aftermarket 5 x 4.5" axles were available for the Isuzu D44, it would be an economic no brainer since axles should be considerably cheaper than regearing. But I've never seen or heard of them, and I don't want a bastardized wheel set. And 4.10 XJ/MJ axles are basically unobtainium now............

Okay Kyleag, most impressive. But you only need 140 lbs more for a full TON mate. Throw your wife (if you have one) back there, or a very large dog or three. W. pics. :cheers:

Mnkyboy, do you actually live in Boring? "The most exciting place to live." :cheers:

Just tried the "Post Reply" button to this topic with both IE7 and Firefox 2.0 and it does it with both browsers. :hmm:

Kind of a nit-picking problem, but whenever you go to reply to a post, you get the log in screen, then after logging in you get sent back to the "Home" page. Then you have to find the original post again to respond. Can this be fixed Pete? Gracias..........

Yep. It's especially aggravating in the Classified section when some fool advertises items "for local pickup" and doesn't say where they are. In spite of banners requiring the location in the title. :nuts: Just lazy or can't read................