Jump to content

Recommended Posts

Posted

Throwing this thread together quickly on how I sourced a tonneau cover for my short bed. In brief, no one makes tonneau covers or bed covers for the Comanche, so we're relegated to next best sizes for other truck models. neverrust.net has this useful reference table for finding next best fits. I had Claude gin up a quick bounds check against that. I took another quick pass this evening to make it more share-able as a gist. I'm providing that more for posterity than anything. Use with your own measurements at your own risk!

 

Running the script with the measurements I took off my '91 Eliminator yielded this output:

Beds with outside length 71.5-75 in. and outside width 55-60.5 in.:

Make        Model                                            Years      Outside LxW  Inside LxW
----------  -----------------------------------------------  ---------  -----------  --------------
CHEVY/GMC   GM Compact/Midsize Truck, S10/Sonoma, Short Bed  1982-1993  75 x 60.25   71.25 x 55.375
DATSUN      D-50 Short Bed                                   1962-1971  74.5 x 58.5  ? x ?
DODGE       Dodge Compact Truck, Ram 50 Short                1987-1997  74.5 x 60    ? x ?
JEEP        Commanche Short Bed                              1986-1996  75 x 60      ? x ?
MAZDA       Cab Plus                                         1986-1993  74.5 x 60    75 x 50
MITSUBISHI  Triton, Short Bed                                1987-1996  74.5 x 60    72 x 55.75
NISSAN      Nissan Short Bed                                 1985-1986  74 x 58.5    72 x 53.5
NISSAN      Nissan Short Bed                                 1983-1984  75 x 60      73 x 55

8 of 124 beds matched. Another 41 in the chart have no outside dimensions listed and couldn't be checked.

Bed dimensions courtesy of NeverRust: https://neverrust.net/cross-reference-chart-for-pickup-truck-bed-size-dimensions/

 

It's not especially novel information, but this at least corroborated that the 1st gen S-10 was a damn close fit, enough that I opted to act on it. I ended up purchasing this "DNA Motoring New Upgrade Truck Bed Top Hard Solid Tri-Fold Tonneau Cover Compatible with 82-93 S10 / 82-90 S15 / 91-93 Sonoma 6Ft Bed, TTC-HARD-039" off of Amazon.

 

Here's a photo from my build thread along with some additional fitment photos.

IMG_1845Medium.jpeg.91030e5e8a31aa94e527184c52100fb8.jpeg

 

The lip of my tailgate is beat up, and it needs new bumpers (which I have from Key Parts), leaving a pinky finger sized gap in the center. If I wanna be especially particular (and I especially am), the cover was a hair small when I got it and has since settled to the best I could ask for.

IMG_4253Medium.jpeg.cd2f76ec8fe54d582c8822314c51c643.jpegIMG_4254Medium.jpeg.3f9c99e89a1aaa840b16296c98855b9b.jpeg

 

In conclusion: Based on the above chart and my anecdote of a single successful purchase, I'd say the best proxy size to shop for is a 1st gen S-10.

Posted

While we're on the subject, I feel it necessary to reiterate that the external dimensions of the bedside panels are not square. They taper towards the rear end as pictured below.

 IMG_4258Medium.jpeg.b35f41257c6676934865d4d1dad8f7ef.jpeg

 

Here's a photo of the Comanche specific bed cover that came on my truck (gifted to another Comanche owner). If you look closely, you can see it's built square and does not follow the taper. As a practical matter, I don't think any manufacturer ever would on account of the complexity. So it's just the way these trucks are at the end of the day :)

IMG_0788Medium.jpeg.6f65331ea2bc73066038f8079a796241.jpeg

 

Posted

Took the best photos I can, camera lens plays tricks though. Here's the folded configuration. I also have the uncompressed images attached in a zip at the end.

IMG_4271.jpeg.28d48164027f7f6c163bcfeddcff2e95.jpeg

 

The first one is 25" on the money:

IMG_4267.jpeg.88cd71db8c600ff22753d5297c90ae63.jpeg

 

Here's the next segment:

IMG_4269.jpeg.77ffac88333ed89c4d30291a951908ed.jpeg

 

and where the end lands there.

IMG_4270.jpeg.2f0b18a215977c5a3c9ef36032bf88ce.jpeg

 

bed_cover_photos.zip

Posted

Just to put this out there as it frequently gets missed: Truck Covers USA makes what I’d call the best bed cover specific for our trucks. It’s about 2k, and a top quality unit. 

Posted

i have a ?? Pendaliner??  bed liner in my 1989,  was in it when I purchased truck in 1997,  the liner covers the top ledge of the bed sides....
would the cover you link and used fit?   
Installation is drilling the top ledge of the bed?   think i have an aluminum top edge cover on my tailgate... 

Posted
13 hours ago, llhat said:

i have a ?? Pendaliner??  bed liner in my 1989,  was in it when I purchased truck in 1997,  the liner covers the top ledge of the bed sides....
would the cover you link and used fit?   
Installation is drilling the top ledge of the bed?   think i have an aluminum top edge cover on my tailgate... 

 

The particular tri-fold I linked uses this style of clamp on the bedside rails. If your bed liner leaves them accessible it'll work, otherwise you may need to modify the liner.

 IMG_4275.jpeg.b62ef600a6bca5bb47089f2d25afb59c.jpeg

Posted
9 hours ago, fiatslug87 said:

@Moosieus  Do you think the panels can be separated? Thanks for the pics.

 

Anything can be separated with sufficient employ of implements of destruction :P

 

As to the spirit of your question, there's some exposed 3mm hex screws on the hinges, but removing them yielded nothing but the screw itself:

IMG_4277.jpeg.64fd0110d00d121e7eb7c2bf509ca310.jpegIMG_4280.jpeg.cf65365603d3c1f7208a06cba6ae112e.jpeg

 

I peaked under one of those foam blocks what little I could, but I didn't find any hidden fasteners.

 

My superficial assessment is, one may be able to tease it apart with a craft knife set, some pry tools, and maybe a heat gun for potential adhesives. I don't see a means via fasteners alone.

Posted

Thanks, appreciate you trying. I’m thinking of a way to use a hard cover like this with the sport bar. The first piece being 25” would go past the kickers (in my SWB) allowing sections 2 & 3 to fold. The trick is getting the first piece in between and around the sport bar.

One more question, how thick is the cover at the bed rails?

Posted
10 hours ago, Moosieus said:

 

The particular tri-fold I linked uses this style of clamp on the bedside rails. If your bed liner leaves them accessible it'll work, otherwise you may need to modify the liner.

 IMG_4275.jpeg.b62ef600a6bca5bb47089f2d25afb59c.jpeg

 thank you

my liner is solid up the sides,  there are fairly large head screws that seem to retain the liner and the liner covers the rail.    Installation based on you image would require large cuts in the liner for that type of clamp arrangement.

response is appreciated.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...