Which screw goes here, and what are these screws?

[jodawill]

I have two questions here. First, what screw goes into this hole above the B pillar? Is it one of these three machine screws in the photo?

 

Second question. If it is these screws, where does the third one go? Am I missing it on another piece of trim somewhere? I haven't noticed any other screws missing. Or is it used to hold the jack in somehow? I can't remember.

[fiatslug87]

Those three hold the inner door handle plate in place. The one in the b-pillar is a Philips pan head screw.

[jodawill]

Thanks! I can't believe I forgot about the door handle. I'm in trouble though because I can't find those two for the pillars. I hope they turn up. But I guess it doesn't constitute an emergency.

[ghetdjc320]

The Dorman GM interior trim screw kits have that screw in their assortment. I bought several of those kits and have been able to use them all around the jeep for trim screws.

[TheNerfsmith]

On that topic, When the previous owners swapped over a cherokee interior (I documented this on my build thread) a lot of the fasteners for dash and interior are now missing. Is there a kit that widely includes all the fasteners for the MJ's Interior?

[ghetdjc320]

3 hours ago, TheNerfsmith said:

On that topic, When the previous owners swapped over a cherokee interior (I documented this on my build thread) a lot of the fasteners for dash and interior are now missing. Is there a kit that widely includes all the fasteners for the MJ's Interior?

Sounds like something @boxyjeep might offer. Otherwise, the interior screw assortment from Dorman works very well, granted, there will be several in the kits that isn’t used. 

[boxyjeep]

Screw assortment:  https://boxyjeep.com/products/interior-screw-assortment-jeep-xj-mj

 

Caps:

https://boxyjeep.com/products/interior-trim-bolt-hole-caps
 

A Pillar Retainer Fix:

https://boxyjeep.com/products/a-pillar-trim-repair-domes

[ghetdjc320]

47 minutes ago, boxyjeep said:

A Pillar Retainer Fix:

https://boxyjeep.com/products/a-pillar-trim-repair-domes

Ok, that’s an awesome product!! Very clever solution to a very common problem. Do you know if these would also fit the b pillar trim upper screw hole? The one just above the courtesy light.

[boxyjeep]

13 hours ago, ghetdjc320 said:

Ok, that’s an awesome product!! Very clever solution to a very common problem. Do you know if these would also fit the b pillar trim upper screw hole? The one just above the courtesy light.

 

Thanks!  I haven't tested it on the B-Pillar but believe it should work.

[Salvagedcircuit]

The b-pillar plugs are a slightly different size. when I cad'ed up some for my interior, the ones on the A-pillar did not fit snug in the b-pillar. I have the cad somewhere. its been a while.