Seat fasteners to body

[90BlackMJ]

Good morning! Would somebody pleaseeee snap a picture of what the seat mounting fastener nuts look like? 
 

bucket seats, I don’t think it matters tho. 
 

in my mind they are probably a 13mm with a big flange washer. Can’t seem to find where I put em 

[jodawill]

I could get a photo if you need it, but yes, it's a 13mm flange nut.

[jodawill]

[90BlackMJ]

Thanks! I know weird question. But I want my restoration to be proper. 

[ghetdjc320]

The ones on my 90 have a captured washer that’s a bit larger than the one in the pic 

[jodawill]

48 minutes ago, ghetdjc320 said:

The ones on my 90 have a captured washer that’s a bit larger than the one in the pic 

 

Do you know if yours are original? Mine is also a 1990, and I have a bench seat. One of the bolts was replaced with a hole at some point so that one has a bolt going down into it instead, but I have no reason to believe the other ones aren't original.

[fiatslug87]

My 90 that I purchased new has flanged nuts exactly like the picture above, as do the 88 and 89.

[ghetdjc320]

Here are the originals on my 90. They are the same as my 91 as well. Larger washer than I see on the ones in the pics above. 
 

 

[jodawill]

I don't know about the bucket seats, but the bench seat also has four washers in the back. Maybe it's not original? Who knows.

[fiatslug87]

1 hour ago, ghetdjc320 said:

Here are the originals on my 90. They are the same as my 91 as well. Larger washer than I see on the ones in the pics above. 
 

 

Interesting. I went and looked at the 89 and 90, different nuts. The 90 was originally a bench seat, the 89 bucket. The 89 has the larger flange, I would check the 88 that was a bench but they’re in a bag somewhere. @ghetdjc320 were your two originally buckets?

89:

90:

[fiatslug87]

The 87-90 parts catalog has the same PN for both bench and bucket track nuts: 11502811

[ghetdjc320]

7 hours ago, fiatslug87 said:

The 87-90 parts catalog has the same PN for both bench and bucket track nuts: 11502811

Yep, both my 90 and 91 were eliminators with buckets

[AnotherOldJeepGuy]

I am the original owner of my particular 90 and I can vouch that these have never been touched since the day I drove it off the lot.  Judging from this conversation, it would appear there are at least 2 different OEM nuts for this use .

 

[fiatslug87]

56 minutes ago, AnotherOldJeepGuy said:

I am the original owner of my particular 90 and I can vouch that these have never been touched since the day I drove it off the lot.  Judging from this conversation, it would appear there are at least 2 different OEM nuts for this use .

 

Bench or buckets?

[AnotherOldJeepGuy]

I have bench.

[jodawill]

Related question. I forgot to put these washers back under the carpet. How badly did I mess up? Do I need to immediately pull all the trim back off before I drive it? As you can see, one was already missing.

[90BlackMJ]

lol so the consensus is either one would be correct. 
 

I found 8 nuts matching jodawill’s. 
 

thanks everyone. Now we all know!