MJ Blinkers.....😡😡😡😡

[Ωhm]

On 4/10/2026 at 9:09 PM, mjfreak said:

when they aren't working i have found that the purple wire on the multi function swith will be blinking with test light but blinkers aren't working....if i had hair I would be pulling it out.

 

If your testlight was on pin C156_K, this would be normal and a testlight would blink. Try same hookup but instead use C156_L with KEY ON. Should make testlight blink.

 

[mjfreak]

I think I found the problem....fingers crossed.....someone suggested pulling brake/hazard fuse to see if thats how it was back feeding......as soon as I touched it things started working.....so I bypassed that circuit and so far everything is working correctly.....so we shall see

[Eagle_SX4]

2 hours ago, mjfreak said:

I think I found the problem....fingers crossed.....someone suggested pulling brake/hazard fuse to see if thats how it was back feeding......as soon as I touched it things started working.....so I bypassed that circuit and so far everything is working correctly.....so we shall see

Sounds like your fuse block needs to be rebuilt. It is a known issue with the manual transmission trucks. The clutch master cylinder leaks on top of the fuse block causing a lot of issues.

 

This thread has a good breakdown of the fuse block.