350cjmass Posted Thursday at 05:27 AM Share Posted Thursday at 05:27 AM First attempt to "reach back out" to my old off-road community and see if anyone might have some interest. I'll be posting my "postponed First attempt to "reach back out" to my old off-road community and see if anyone might have some interest. I'll be posting my "postponed" project elsewhere soon. I'll need my Jeeps gone before the New Year unfortunately. Two Comanche's for the project: 600+ photos avail (buried atm) 1990 MJ long bed 4.0 5sp, metric-ton leafs, lifted/daily-driven before/after and during build... Ran out of time, ambition, and youth lol (also getting divorced). Well over 1k hrs into this... The "project vehicle" is a 90 MJ long-bed 5-spd 6. Purchased on E-Bay back in 2011 whilst on vacay. I have a VERY remote cabin up in Maine (no Internet/ANY communications) up there. I had bid on the vehicle whilst heading north for vacay; didn't have "connectivity" till I got home 2weeks later; and realized I'd "won" my eBay bid. Drove down to get the vehicle shortly after arriving home; five hrs and 4 ferries later, got the MJ headed home ♥️ Along the way home I realized the "thing" i had purchased sight unseen "was an Northeast MJ".(Aka, what the heck did I do?Are there any floorboards?🤦🏼🤣) Lol Spent the next 2.5 yrs going hard with this project. I purchased 3 separate "donor vehicles" for this, bought one of "the last" set of 1 ton mil-wrap leafs made, one of the last tonneau covers made, ect, ect... I had wanted "this" Comanche to be reborn, and wanted it to be "above" what I'd seen on ComancheClub, wanted it to be "above". Life gets in the way... (Doors,seats & interior from '96 Cherokee included, Plow,wiring,ect from a different Comanche also included. Another (shorty '90 MJ parts vehicle; 6 W/ auto) Comanche (purchased solely due to the fact my EX "overzealously helped me load firewood from the back 40" & sent one through the rear slider🙄 is also included. Also included are 4.89 locked (Detroit-full) axle set, D30 & custom 9" rear with disc, formally run on a Cherokee. (Easy "bolt-on" for MJ, driveshaft mod will be needed). Approximately 89k original miles. Show quoted text " project elsewhere soon. I'll need my Jeeps gone before the New Year unfortunately. Two Comanche's for the project: 600+ photos avail (buried atm) 1990 MJ long bed 4.0 5sp, metric-ton leafs, lifted/daily-driven before/after and during build... Ran out of time, ambition, and youth lol (also getting divorced). Well over 1k hrs into this... The "project vehicle" is a 90 MJ long-bed 5-spd 6. Purchased on E-Bay back in 2011 whilst on vacay. I have a VERY remote cabin up in Maine (no Internet/ANY communications) up there. I had bid on the vehicle whilst heading north for vacay; didn't have "connectivity" till I got home 2weeks later; and realized I'd "won" my eBay bid. Drove down to get the vehicle shortly after arriving home; five hrs and 4 ferries later, got the MJ headed home ♥️ Along the way home I realized the "thing" i had purchased sight unseen "was an Northeast MJ".(Aka, what the heck did I do?Are there any floorboards?🤦🏼🤣) Lol Spent the next 2.5 yrs going hard with this project. I purchased 3 separate "donor vehicles" for this, bought one of "the last" set of 1 ton mil-wrap leafs made, one of the last tonneau covers made, ect, ect... I had wanted "this" Comanche to be reborn, and wanted it to be "above" what I'd seen on ComancheClub, wanted it to be "above". Life gets in the way... (Doors,seats & interior from '96 Cherokee included, Plow,wiring,ect from a different Comanche also included. Another (shorty '90 MJ parts vehicle; 6 W/ auto) Comanche (purchased solely due to the fact my EX "overzealously helped me load firewood from the back 40" & sent one through the rear slider🙄 is also included. Also included are 4.89 locked (Detroit-full) axle set, D30 & custom 9" rear with disc, formally run on a Cherokee. (Easy "bolt-on" for MJ, driveshaft mod will be needed). Approximately 89k original miles. Show quoted text Link to comment Share on other sites More sharing options...
fiatslug87 Posted Thursday at 05:55 AM Share Posted Thursday at 05:55 AM You need to post a price as per forum rules. Link to comment Share on other sites More sharing options...
JolietJEEP'84 Posted Thursday at 06:28 PM Share Posted Thursday at 06:28 PM Sounds like Kody Kilmer special. Link to comment Share on other sites More sharing options...
watchamakalit Posted 23 hours ago Share Posted 23 hours ago On 12/19/2024 at 12:55 AM, fiatslug87 said: You need to post a price as per forum rules. And a price, unless I overlooked it in the op Link to comment Share on other sites More sharing options...
NHMJXJ Posted 16 hours ago Share Posted 16 hours ago Link to comment Share on other sites More sharing options...
Recommended Posts