Rubikahn Posted April 6, 2022 Share Posted April 6, 2022 In the process of doing the valve cover mod and just wanted to confirm one last thing. Got the baffles measured out to be cut down 1”. The new 1/2” hole goes on the back side above the previous hole or on the side which will face towards the back of the valve cover? Thanks all Link to comment Share on other sites More sharing options...
89 MJ Posted April 6, 2022 Share Posted April 6, 2022 @cruiser54 would probably know the answer. Link to comment Share on other sites More sharing options...
Eagle Posted April 6, 2022 Share Posted April 6, 2022 Cruiser does know. Scroll down to post #3 Link to comment Share on other sites More sharing options...
cruiser54 Posted April 6, 2022 Share Posted April 6, 2022 Chop 1 inch off each of them. Then, drill a half inch hole as shown in the photo. The flat side of the flute that’s closest to the edge of the valve cover. Link to comment Share on other sites More sharing options...
Rubikahn Posted April 6, 2022 Author Share Posted April 6, 2022 11 hours ago, cruiser54 said: Chop 1 inch off each of them. Then, drill a half inch hole as shown in the photo. The flat side of the flute that’s closest to the edge of the valve cover. Thank you, I did look at the write up on your website before I posted the question. It just didn’t seem clear to me. I already have one hole in each of those. Am I just widening the existing hole to 1/2”? Sorry, maybe it’s just me… Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now