mjeff87 Posted November 10, 2021 Share Posted November 10, 2021 Not putting this in classifieds. Went junkyarding to get parts for my Focus this morning (fail....) and they had an 87, 2.5L, AX5, 2WD there. Its pretty well picked over, but the entire driveline is pulled and lying on the ground. Engine looks like a replacement due to paint pen marks all over the valve cover. I did snag the fuel pump in case someone needs it. Post up if so....but I'm not looking to profit off of it. I will forward it to anyone who really needs it (versus someone who just wants to flip it for some $$$). Cover my cost from the 'yard plus shipping. I also snapped a VIN pic so it can be added to the registry Link to comment Share on other sites More sharing options...
mjeff87 Posted November 10, 2021 Author Share Posted November 10, 2021 I can grab parts off the 2.5 if anyone needs them too, just let me know if you need something (IAC, TB. alternator bracket, etc.) Link to comment Share on other sites More sharing options...
eaglescout526 Posted November 10, 2021 Share Posted November 10, 2021 I definitely need that valve cover. Unless someone else needs it more than me to hoard them. I’ll take the whole TBI too. Link to comment Share on other sites More sharing options...
mjeff87 Posted November 10, 2021 Author Share Posted November 10, 2021 lol. I thought about you when I posted this I can get back down there tomorrow, they are on "winter hours" now due to the time change and close at 5PM. Ill grab the VC and TB for you. Link to comment Share on other sites More sharing options...
eaglescout526 Posted November 10, 2021 Share Posted November 10, 2021 Hahahaha I’m glad you did. Shame it doesn’t have AC but the other two are just as important. Would you mind leaving that pipe that’s in the valve cover already with it? Seems to be something folks are missing. But sounds like a plan. Shoot me a PM and we can work out the finer details. Link to comment Share on other sites More sharing options...
Pete M Posted November 10, 2021 Share Posted November 10, 2021 19 minutes ago, eaglescout526 said: Hahahaha I’m glad you did. Shame it doesn’t have AC but the other two are just as important. Would you mind leaving that pipe that’s in the valve cover already with it? Seems to be something folks are missing. But sounds like a plan. Shoot me a PM and we can work out the finer details. that smashed MJ at the LKQ shows it had AC. what related parts do you need? (keeping in mind that they might be... smashed) Link to comment Share on other sites More sharing options...
eaglescout526 Posted November 10, 2021 Share Posted November 10, 2021 16 minutes ago, Pete M said: that smashed MJ at the LKQ shows it had AC. what related parts do you need? (keeping in mind that they might be... smashed) Just the mounting brackets for both the alt and the compressor along with the hardware attached. I mean I already have AC but I like having the parts ready and on hand for those in need. Link to comment Share on other sites More sharing options...
mjeff87 Posted November 11, 2021 Author Share Posted November 11, 2021 The MJ is gone..... They must have yanked out that whole row last night. And just that row. I tried to catch them before they crushed it, was not successful. Link to comment Share on other sites More sharing options...
mjeff87 Posted November 11, 2021 Author Share Posted November 11, 2021 Much sadness..... Link to comment Share on other sites More sharing options...
eaglescout526 Posted November 11, 2021 Share Posted November 11, 2021 Such a shame. It still had some good parts. Link to comment Share on other sites More sharing options...
mjeff87 Posted November 11, 2021 Author Share Posted November 11, 2021 The engine was still lying there. I PM'd you. Link to comment Share on other sites More sharing options...
eaglescout526 Posted November 11, 2021 Share Posted November 11, 2021 Yup! Was taking another look at all was still good on that MJ. Link to comment Share on other sites More sharing options...
Pete M Posted November 12, 2021 Share Posted November 12, 2021 On 11/10/2021 at 4:15 PM, eaglescout526 said: Just the mounting brackets for both the alt and the compressor along with the hardware attached. I mean I already have AC but I like having the parts ready and on hand for those in need. I was successful. even with the Jeep crushed in that corner the aluminum bracket was not cracked. Link to comment Share on other sites More sharing options...
eaglescout526 Posted November 12, 2021 Share Posted November 12, 2021 2 minutes ago, Pete M said: I was successful. even with the Jeep crushed in that corner the aluminum bracket was not cracked. Sweet!!! I think @carolinajeepman was/is looking for the alt bracket for his set up. Link to comment Share on other sites More sharing options...
carolinajeepman Posted November 12, 2021 Share Posted November 12, 2021 1 hour ago, eaglescout526 said: Sweet!!! I think @carolinajeepman was/is looking for the alt bracket for his set up. Sure am!! Link to comment Share on other sites More sharing options...
Pete M Posted November 12, 2021 Share Posted November 12, 2021 1 hour ago, carolinajeepman said: Sure am!! just the alternator bracket? Link to comment Share on other sites More sharing options...
carolinajeepman Posted November 12, 2021 Share Posted November 12, 2021 just the alternator bracket?I think at this point I’m down to the alternator bracket, all the wiring related to the AC, and the actual heater box with evap coil to be able to do the job. Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
eaglescout526 Posted November 12, 2021 Share Posted November 12, 2021 38 minutes ago, carolinajeepman said: and the actual heater box with evap coil to be able to do the job. Any XJ from 84-96 will work, you’ll just need to get the Renix era thermistor and push it through the core if you find an HO box. I can walk ya through it. Link to comment Share on other sites More sharing options...
carolinajeepman Posted November 13, 2021 Share Posted November 13, 2021 13 hours ago, eaglescout526 said: Any XJ from 84-96 will work, you’ll just need to get the Renix era thermistor and push it through the core if you find an HO box. I can walk ya through it. Yeah I might just go with the HO box because of the easier to source Evap coil. Pretty sure they are slightly different sizes from what I remember. Sounds good thanks @eaglescout526 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now