comochingas Posted January 2, 2021 Share Posted January 2, 2021 1989 Comanche 4.0 2WD Hazard turn on when left or right turn signals are used, started a few days ago when I swap over to LED bulbs. Changed back to new factory bulbs and changed out the flashers and still having the same problem should note that when I press on the brake the dash turns on, in fact everything except the headlamps turn on when the brakes are pressed. Help! Link to comment Share on other sites More sharing options...
MiNi Beast Posted January 2, 2021 Share Posted January 2, 2021 combination switch on underside of lower column. Link to comment Share on other sites More sharing options...
Aussiemj Posted January 2, 2021 Share Posted January 2, 2021 May be a bad earth at the tail light Link to comment Share on other sites More sharing options...
Jesse J Posted January 2, 2021 Share Posted January 2, 2021 Just now, Aussiemj said: May be a bad earth at the tail light lol an earth Link to comment Share on other sites More sharing options...
MiNi Beast Posted January 2, 2021 Share Posted January 2, 2021 yeah good be good to check grounds (earth) eh mate. Link to comment Share on other sites More sharing options...
Aussiemj Posted January 2, 2021 Share Posted January 2, 2021 The black wire thing or the negative terminal that what we call the earth in Australia Link to comment Share on other sites More sharing options...
Aussiemj Posted January 2, 2021 Share Posted January 2, 2021 You have fender and trunks we have guards and boot Link to comment Share on other sites More sharing options...
MiNi Beast Posted January 2, 2021 Share Posted January 2, 2021 and kangaroos! Link to comment Share on other sites More sharing options...
Jesse J Posted January 2, 2021 Share Posted January 2, 2021 2 minutes ago, Aussiemj said: The black wire thing or the negative terminal that what we call the earth in Australia oh cool I am not the most cultured Link to comment Share on other sites More sharing options...
comochingas Posted January 3, 2021 Author Share Posted January 3, 2021 Thanks everyone, @Jesse J @Aussiemj I did notice that my back passenger tail light didn't have a ground/ earth/ chingadera on it but the back driver side did. They should all have one for there respective cluster or does the whole back end share one common ground? oh, took the truck out today and my parking lights fuse shorted, if that gives someone some more let me know. @MiNi Beastill be checking on the combination switch if its not the chingadera . Link to comment Share on other sites More sharing options...
MiNi Beast Posted January 3, 2021 Share Posted January 3, 2021 may need to give a good inspection of light harness and sockets. common wire issues in there. @Pete M need your link for light harness upgrade before fire breaks out. Link to comment Share on other sites More sharing options...
Pete M Posted January 3, 2021 Share Posted January 3, 2021 the link in my sig will take you to an example relay harness (the ebay ads don't last so you'll want to run a search for it on ebay or amazon) but it won't fix a problem, only reduce the power going through the headlight switch. in order to use LEDs in the turn lights you need the special flasher pot that runs LEDs. (or the expensive LEDs with built in resistors to fake being a regular bulb but those don't reduce any strain on the wiring.) Link to comment Share on other sites More sharing options...
comochingas Posted January 3, 2021 Author Share Posted January 3, 2021 @Pete M The 1st thing I ordered was a upgrade headlight harness from K suspension works great. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now