Jesse J Posted December 31, 2020 Share Posted December 31, 2020 So @Pete Mtold me to put this here. has anyone moved or removed their parking brake cable while doing rust repair. I would like to move it permanently because for flooring I am going to move lay down some sound deadened and bedline it and it would get in the way Link to comment Share on other sites More sharing options...
jdog Posted January 1, 2021 Share Posted January 1, 2021 you could look into the cherokee hand brake Link to comment Share on other sites More sharing options...
Jesse J Posted January 1, 2021 Author Share Posted January 1, 2021 Just now, jdog said: you could look into the cherokee hand brake nah Id like for it to stay on the ground but maybe running it under the body? Link to comment Share on other sites More sharing options...
MiNi Beast Posted January 1, 2021 Share Posted January 1, 2021 does it work? Link to comment Share on other sites More sharing options...
jdog Posted January 1, 2021 Share Posted January 1, 2021 its a auto, you can eliminate it if you wanted to Link to comment Share on other sites More sharing options...
MiNi Beast Posted January 1, 2021 Share Posted January 1, 2021 2 minutes ago, jdog said: its a auto, you can eliminate it if you wanted to unless needed for inspection.. Link to comment Share on other sites More sharing options...
Jesse J Posted January 1, 2021 Author Share Posted January 1, 2021 2 hours ago, MiNi Beast said: does it work? I don't think so just is too loose right now 1 hour ago, MiNi Beast said: unless needed for inspection.. that is a fair point I need to inspect it soon. and I t will be nice offroad or like camping I mean chock it obviously. Link to comment Share on other sites More sharing options...
MiNi Beast Posted January 1, 2021 Share Posted January 1, 2021 i ask if works cause that typically don't. if it dosent work then id say pull it and junk it as you really don't need it with an auto. as mention a hand brake would allow you to run cable through trans tunnel to rear and take up space in center. if you are wanting to keep it for whatever reason people do then pull it and soak it in a bucket of pbblaster mix to free it up, cable that is. do your floor work then reinstall. i personally never used it offroading or anywhere and have long since pulled it and lost the 6.8 lbs of unneeded weight. i can now go .0013 mph faster and have never looked back. now don't get me wrong a parking brake is a good back up for steep hills and like power braking donuts and what not. and not sure about you and your state inspections as may require one, mi dosent care. prolly cause they all rust out anyways. so your rig, your call. but it would be nice to have if you had a ax15 in it. Link to comment Share on other sites More sharing options...
Jesse J Posted January 1, 2021 Author Share Posted January 1, 2021 49 minutes ago, MiNi Beast said: i ask if works cause that typically don't. if it dosent work then id say pull it and junk it as you really don't need it with an auto. as mention a hand brake would allow you to run cable through trans tunnel to rear and take up space in center. if you are wanting to keep it for whatever reason people do then pull it and soak it in a bucket of pbblaster mix to free it up, cable that is. do your floor work then reinstall. i personally never used it offroading or anywhere and have long since pulled it and lost the 6.8 lbs of unneeded weight. i can now go .0013 mph faster and have never looked back. now don't get me wrong a parking brake is a good back up for steep hills and like power braking donuts and what not. and not sure about you and your state inspections as may require one, mi dosent care. prolly cause they all rust out anyways. so your rig, your call. but it would be nice to have if you had a ax15 in it. ok I promise to swap when I rebuild my engine ok! that's probably what I will do. Ill carry some chocks behind the seat tho Link to comment Share on other sites More sharing options...
Jesse J Posted January 1, 2021 Author Share Posted January 1, 2021 how do you disconnect the brake cable? Link to comment Share on other sites More sharing options...
MiNi Beast Posted January 1, 2021 Share Posted January 1, 2021 grinder, cable cutters, don't you have a repair manual? Link to comment Share on other sites More sharing options...
Jesse J Posted January 1, 2021 Author Share Posted January 1, 2021 7 minutes ago, MiNi Beast said: grinder, cable cutters, don't you have a repair manual? I don't. oh I guess online. I guess I will just cut it out. I just tryed drilling out the welds with a twist bit and decided that that wasn't gonna work I'm gonna try to go to harbout frieght tomorrow(even though I hate them) and get one. Link to comment Share on other sites More sharing options...
Sir Sam Posted January 7, 2021 Share Posted January 7, 2021 Have auto. No way in hell I’d go wheeling in the mountains without my parking brake. Link to comment Share on other sites More sharing options...
Jesse J Posted January 7, 2021 Author Share Posted January 7, 2021 yeah that is what I was thinking. Link to comment Share on other sites More sharing options...
MiNi Beast Posted January 7, 2021 Share Posted January 7, 2021 cmon live on the edge. Link to comment Share on other sites More sharing options...
MiNi Beast Posted January 7, 2021 Share Posted January 7, 2021 12 minutes ago, Sir Sam said: Have auto. No way in hell I’d go wheeling in the mountains without my parking brake. how do you use your parking brake? Link to comment Share on other sites More sharing options...
Jesse J Posted January 7, 2021 Author Share Posted January 7, 2021 I wouldn't trust my parking brake offroad I think I will just carry some chocks Link to comment Share on other sites More sharing options...
.thumb.jpg.eac92cd48b872a3d9085fc2cd936e941.jpg)
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now