Jump to content

Cherokee dash to Comanche chassis


Recommended Posts

Has anyone ever swapped a Cherokee dash and installed it into a Comanche chassis? I am having issues with the dash harness and not having enough pins. My brake lights originally didn’t work. Installed new light bulbs then checked the switch.using my test light I found that Cherokee side I have brake lights. Comanche side is pinned different and not sure if anyone else ran into this issue? 

Link to comment
Share on other sites

You have to run a wire from the P terminal coming from your multifunction switch to pin 11 on the black XJ dash connector.

Scratched my head over this one when I did my HO swap.


https://r.tapatalk.com/shareLink/topic?url=https://comancheclub.com/topic/18588-xj-dash-harness-to-rear-mj-harness-wiring-guides/&share_tid=18588&share_fid=53169&share_type=t&link_source=app

Link to comment
Share on other sites

29 minutes ago, Redrover said:

Pin 11 has 2 wires going to it already. Does that matter? 

2 wires already? ummm? better double check the pin connections again. 

33 minutes ago, Redrover said:

Is the malfunction switch the brake switch?

 

no. be on the lower side of steering column  blinkers run though this as well as wipers. 

 

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...