Big Dan Posted July 19, 2020 Share Posted July 19, 2020 Any ideas as to why this part of the water pump keeps flying off of the shaft? Brand new Mopar pump. Link to comment Share on other sites More sharing options...
jdog Posted July 19, 2020 Share Posted July 19, 2020 defective part Link to comment Share on other sites More sharing options...
Big Dan Posted July 19, 2020 Author Share Posted July 19, 2020 Thats what I figured...thanks for the confirmation. For future reference, what is the "technical" term of that item? Link to comment Share on other sites More sharing options...
jdog Posted July 19, 2020 Share Posted July 19, 2020 water pump flange or pulley flange Link to comment Share on other sites More sharing options...
ghetdjc320 Posted July 19, 2020 Share Posted July 19, 2020 Any chance they gave you the water pump for a wrangler? They spin in the opposite direction of XJ/MJs Link to comment Share on other sites More sharing options...
Big Dan Posted July 20, 2020 Author Share Posted July 20, 2020 I suppose it's possible. The part number matched correctly for an XJ, however.Either way, the flange seems to be interference fit. I'm not sure why it would not stay seated, other than a defect. Sent from my Pixel 2 XL using Tapatalk Link to comment Share on other sites More sharing options...
yxmj Posted July 21, 2020 Share Posted July 21, 2020 The part is defiantly defective no mater which way it turns the flange should not come off. Just to clear up what was said above .....the different rotation is determined by the belt not the model a 2.5 pump will fit on a 4.0 and visa versa.....a pump with a serpentine belt turns counter clockwise....a pump that is driven in a v-belt configuration turns clockwise. V belts did come with the 4.2 on old YJ's yes....but they also came on 2.5's in early XJ's and MJ's (my 87 has V's).....and with some suppliers they are the same part number. Link to comment Share on other sites More sharing options...
AZJeff Posted July 22, 2020 Share Posted July 22, 2020 Those flanges are a press fit onto the water pump shaft, and are designed to be an interference fit during manufacture. It sounds like the one you got is defective. I would expect something like that from Autozone or the like, but not from Mopar. Then again, no brand is TRULY without a defect now and then. You got lucky and won the defective part lottery from Mopar, I guess. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now