Need new stock leaf springs, not finding any

[1989 comanche mj]

Has anyone bought new stock height leaf springs lately?

I noticed one of my leafs was really bent up, like an S shape in front.  I have about 7 inches of lift, stock leafs with a spring over in the rear.  I'm surprised they have lasted as long as they have with 35s.   I am not finding them anywhere, except at some obscure sites that I would have to call to see if they really exist.  Not like cherokee where there are loads of them from dorman and the like.

[MiNi Beast]

hell creek, denver leaf, search in links we have a vendor on here for just that. 

[ghetdjc320]

Many have purchased the general springs in KC and they work fine but will lift over stock height. JD Jeeps in CA is where I bought my last set of springs from for my soa. Great used set with no rust

[benjy_26]

On 4/12/2020 at 8:01 PM, ghetdjc320 said:

Many have purchased the general springs in KC and they work fine but will lift over stock height. JD Jeeps in CA is where I bought my last set of springs from for my soa. Great used set with no rust

Do you know how much over stock the General Springs lift our trucks? 

[ghetdjc320]

25 minutes ago, benjy_26 said:

Do you know how much over stock the General Springs lift our trucks? 

On my soa it lifted a solid 2” over good used 4x4 springs. Never settled either, I ended up giving those springs away to a Toyota truck guy

[benjy_26]

1 hour ago, ghetdjc320 said:

On my soa it lifted a solid 2” over good used 4x4 springs. Never settled either, I ended up giving those springs away to a Toyota truck guy

Thanks for the info! 

 

Out of curiosity, what kind of Toyota did those springs end up on? 

[ghetdjc320]

17 minutes ago, benjy_26 said:

Thanks for the info! 

 

Out of curiosity, what kind of Toyota did those springs end up on? 

Not sure. Here in Guam they love their mini trucks so I would assume it’s some custom mini truck. Lots of Hilux’s here too 

[Eagle]

On 4/12/2020 at 7:30 PM, 1989 comanche mj said:

 

I noticed one of my leafs was really bent up, like an S shape in front.  I have about 7 inches of lift, stock leafs with a spring over in the rear.

 

Which leaf is bent? Please post photos of both of your springs, at the front eyes and at the rear eyes.

 

Stock springs in a SOA conversion should not produce 7 inches of lift. Should be closer to 5-1/2 inches.