ScottJeep Posted August 14, 2018 Share Posted August 14, 2018 Sold my truck. Yeah, I know I've heard it all already. But it's done and gone. The new owner of the truck wanted to keep the factory body. So my full set of armor is available. It has been fully powder coated satin black and includes the front and rear bedsides and the lower rear bed armor pieces as well. These were made by DirtBound Offroad but are their "old style" with the full tube edge. The rears now match because I cut their "new style bend the edge over" off and had tubing custom bent and installed by a local shop. You can't get these anywhere. At my price, you are basically getting the powder coating and the lower pieces for free. Pretty sure I still have the DBO mounting stuff and I have a little cleco set I bought to help me install that I will toss in for free also. If you are local in the Atlanta area willing to central location meet up. If you are in Gwinnett County I'll deliver it all to your door. And yes, I still have other parts, that I will be cleaning out my spares cabinets. Many parts went with the truck. Sorry no mock-ups of the rears. Link to comment Share on other sites More sharing options...
Kona Posted August 29, 2018 Share Posted August 29, 2018 Still have this? Link to comment Share on other sites More sharing options...
tjbuggie Posted August 29, 2018 Share Posted August 29, 2018 Would you sell just the fronts?? Link to comment Share on other sites More sharing options...
ScottJeep Posted August 30, 2018 Author Share Posted August 30, 2018 Sorry... not sure why I was not notified of the replies. Yes, still have. Not really interested in selling just the fronts unless you make it worth it for me. $$$$ :) Link to comment Share on other sites More sharing options...
tjbuggie Posted August 30, 2018 Share Posted August 30, 2018 PM me what it would take to make it worth it for you, I would need them shipped to Texas Link to comment Share on other sites More sharing options...
Swampy Posted September 25, 2018 Share Posted September 25, 2018 Is this still available? Link to comment Share on other sites More sharing options...
ScottJeep Posted September 28, 2018 Author Share Posted September 28, 2018 Message Sent Link to comment Share on other sites More sharing options...
ScottJeep Posted October 13, 2018 Author Share Posted October 13, 2018 The armor is still available. Have had a customer shipping crate made for shipping. The crate is 75" Long X 25" Wide X 20" Tall Fully loaded up this thing weighs ~ 225 Pounds. With this information, anyone should be able to arrange a freight pickup. Have complete dock access where I work. Lawrenceville, Georgia 30045 Here are a few pictures of the armor placed into the crate. Link to comment Share on other sites More sharing options...
Pete M Posted October 13, 2018 Share Posted October 13, 2018 On 8/14/2018 at 5:32 PM, ScottJeep said: If you are in Gwinnett County I'll deliver it all to your door. what, no love for Walton? Link to comment Share on other sites More sharing options...
ScottJeep Posted October 13, 2018 Author Share Posted October 13, 2018 Well, I drive a van around for a certain Gwinnett county group. Could meet you at the county line. :) Link to comment Share on other sites More sharing options...
ScottJeep Posted October 13, 2018 Author Share Posted October 13, 2018 Here are some quotes... just to give an idea of what something like this cost to ship. And again.... Just the armor, bare metal from DirtBound would be $877.00 Plus all the attaching extras and it's already powder coated. Anyway.... really wanted to sell it to another member. Otherwise, you know where it's going. And yeah, have offered to drive ~1.5 hours to meet up and do the exchange if the other side would just fill my gas tank back up. Link to comment Share on other sites More sharing options...
Pete M Posted October 13, 2018 Share Posted October 13, 2018 20 minutes ago, ScottJeep said: Well, I drive a van around for a certain Gwinnett county group. Could meet you at the county line. :) I'd totally take them if I wasn't dirt poor. wish I know when my next trip north was. I'd offer to deliver along I-75. but I just can't promise exactly when it would be. I do know that I'm heading south to Orlando come end of november. Link to comment Share on other sites More sharing options...
Me&my86MJ Posted October 14, 2018 Share Posted October 14, 2018 3 hours ago, Pete M said: I'd totally take them if I wasn't dirt poor. Story of my life, much less I am way up northwest in Oregon, and I have long bed. Link to comment Share on other sites More sharing options...
ScottJeep Posted October 14, 2018 Author Share Posted October 14, 2018 Wrapped up, bolted down, ready for travel. Each screw has the washer you see and then a rubber washer underneath. Trying to do everything to make sure it rides without any damage. Link to comment Share on other sites More sharing options...
Swampy Posted October 15, 2018 Share Posted October 15, 2018 I would love to buy these, but I live in Gainesville, FL those shipping rates are crazy for a 5hr drive Link to comment Share on other sites More sharing options...
Pete M Posted October 15, 2018 Share Posted October 15, 2018 pick a saturday and go for a drive! hell, we could make a mini-meetup out of it. Link to comment Share on other sites More sharing options...
ScottJeep Posted October 17, 2018 Author Share Posted October 17, 2018 Tell me where you would be willing to drive North to and maybe we can work it out. Link to comment Share on other sites More sharing options...
ScottJeep Posted October 17, 2018 Author Share Posted October 17, 2018 The crating cost just made the posted price absolutely FIRM. Link to comment Share on other sites More sharing options...
ScottJeep Posted October 19, 2018 Author Share Posted October 19, 2018 PM sent Link to comment Share on other sites More sharing options...
ScottJeep Posted October 27, 2018 Author Share Posted October 27, 2018 SOLD Now to just see pictures of them installed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.