Master7122 Posted October 24, 2017 Share Posted October 24, 2017 Just replaced my floors and am not sure what to coat them in to protect them. I was thinking por-15 or bedliner and then something along the lines of dynamate as an insulation. Anything cheaper to use then dynamate? Link to comment Share on other sites More sharing options...
coolwind57 Posted October 24, 2017 Share Posted October 24, 2017 Just did my floors last week. I used ChassisSaver followed by rattlecan spray bedliner on new and old sheet metal. For interior, I then used that duct wrap product from Home Depot. Ran me $18.77 each and I used two rolls. This is the self-adhesive foil/foam stuff. I think this is it: https://www.homedepot.com/p/E-O-12-in-x-15-ft-Self-Stick-Foam-Foil-Duct-Insulation-FV516/100028603 I feel good about my chosen solution. Link to comment Share on other sites More sharing options...
Master7122 Posted October 24, 2017 Author Share Posted October 24, 2017 Sweet! Thank you! I will most likely go this route Link to comment Share on other sites More sharing options...
Pete M Posted October 24, 2017 Share Posted October 24, 2017 just jumped in to point out that por-15 and bedliner are not the same thing. por-15 binds to the steel/rust and shuts down the oxidation process. bedliner does no such thing and will not stop rust. Link to comment Share on other sites More sharing options...
cody4359 Posted October 26, 2017 Share Posted October 26, 2017 I used rust bullet when I did my floors 4 or 5 years ago, top and bottom. still looks new, I believe it has a 10 year guarntee to inhibit rustSent from my SM-G900V using Tapatalk Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now