Floorboard coating

[Master7122]

Just replaced my floors and am not sure what to coat them in to protect them. I was thinking por-15 or bedliner and then something along the lines of dynamate as an insulation. Anything cheaper to use then dynamate? 

[coolwind57]

Just did my floors last week.  I used ChassisSaver followed by rattlecan spray bedliner on new and old sheet metal.  For interior, I then used that duct wrap product from Home Depot.  Ran me $18.77 each and I used two rolls.  This is the self-adhesive foil/foam stuff.  I think this is it:   https://www.homedepot.com/p/E-O-12-in-x-15-ft-Self-Stick-Foam-Foil-Duct-Insulation-FV516/100028603

 

I feel good about my chosen solution.

[Master7122]

Sweet! Thank you! I will most likely go this route 

[Pete M]

just jumped in to point out that por-15 and bedliner are not the same thing.  por-15 binds to the steel/rust and shuts down the oxidation process.  bedliner does no such thing and will not stop rust.   

[cody4359]

I used rust bullet when I did my floors 4 or 5 years ago, top and bottom. still looks new, I believe it has a 10 year guarntee to inhibit rust

Sent from my SM-G900V using Tapatalk