Fender Flare Kit and the Fender Flare Retainer Kit by Crown®

[WolverineCub]

Do the Fender Flare Kit and the Fender Flare Retainer Kit by Crown® for Jeep Cherokee 1988 fit a 1988 Jeep Comanche? Crown says the front of these fit.

 

Thanks

 

Steve in Montreal

 

 

[Keyav8r]

Fronts will interchange between XJ & MJ, rears will not.

[Potterman42]

Order the two door kit. I've noticed that some kits for two doors also say will fit comanche. The rear flare for a two door is one piece, the rear flare for four door is two piece.

 

Sent from my SM-G935V using Tapatalk

[Eagle]

Comanche rear flares are NOT the same as 2-door Cherokee rear flares. The Comanche wheel arch is longer and higher.

 

Cherokee rear flares WILL NOT fit a Comanche. This thread is not about aftermarket flares, it's about OEM replacements. OEM Cherokee flares are one piece, regardless of whether it's a 2-door or a 4-door.

[Minuit]

I don't know who started this rumor, but it just will not die... 2 DOOR CHEROKEE REAR FLARES DO NOT FIT ON A COMANCHE!

 

The Crown kit will work fine for the front. I'm running the Crown stock replacement retainers on my 91 and I have no complaints. It's pretty much an exact reproduction of the factory part.

[HOrnbrod]

One other comment regarding Cherokee XJ 2DR and 4DR rear fender flare differences:

 

THERE ARE NONE! 2DR & 4DR REAR FLARES ARE THE SAME!

 

:yes:

[WolverineCub]

Thank You Guys. I got two sets of older Flares but the Jeep is being painted so I was interested in New. I bought the Retainer kit, I may be able to adapt the back retainers. The Comanche is a 1988 4 Cyl 2WD Standard. Most of my fixes came off of a 1986 Comanche 4WD with V6 that developed blow-by and was carburetor so it's in my Yard.