Jump to content

NEED! Tail light harness!


WyoCherokee
 Share

Recommended Posts

In need of a harness for the tail lights. Just the pig tails for the bulb sockets. the wires are broke right at the connector, and no way to crimp them. If i could just get a whole harness with 4 to 5" of wire to crimp or just the reverse bulb sockets with 4 to 5 inches of wire to solder/crimp that would be great!

Link to comment
Share on other sites

It's the whole harness. I cut it right at the grommet where it comes out of the cab. I accidentally stepped on the plug and smashed it and I needed the grommet for my custom harness. I'll take pictures when I get home in about 2 hours.

 

Edit: if you just need a small part of it I can cut it off and send that as well.

Link to comment
Share on other sites

Here is a picture of the rear most part of the harness 6da485cf3d953d1f44b499eae7315b39.jpg

And here's one of the front part of the harness. Notice where I cut it to remove it from the truck. I ended up not needing the grommet so that is still there.

014b0b467b6b500a530d78e9b057d26c.jpg

 

Sent from my HTC6525LVW using Tapatalk

Link to comment
Share on other sites

  • 1 month later...
  • 2 weeks later...
 Share

×
×
  • Create New...