Bed Liner

[deziped]

At long last is finally sprayed. Had Reflex liner shot in yesterday. Bed sure looks nicer.

 

 

Image Not Found

[JeepcoMJ]

shore duz loke purdy.

 

;)

[rockhardzj]

it's so purdy...... :drewl:

[86FUBAR]

Looks good but is that orange peal above the tailgate latch and a tape line on the fender flair :brows:

[deziped]

Yup, that's orange peel (not peal, which is a ding dong) and a tape line. S--- happens when your painting in a barn under one inadequate fluorescent light in a dust storm. Lot of surprises appear when you roll it outside in the light. Oh well, it will get buffed out by brush & trees before long.

[Rob S]

Looks good, I want to do a spray in liner on mine too. At this rate going to be awhile till I get to that point.

[ejndssn]

:bowdown: that really looks good would like to do the same once the my mj gets painted what was the cost for this effort

[deziped]

This liner (Reflex) cost is based on bed length, liner thickness, and extra if you want it sprayed over the rails. PNW cost. In my case 6'bed 300, 3/16 thick $50 and over the rails $50 . Probally could have got a can of stuff at local NAPA for 75 & a roll it on, but, being the basiclly lazy person I'am, that wasn't an option. Besides that stuff in all cases I've seen fades out & chalks up real quick. This stuff is suppose to "stay shiny for a couple years". HHmmm, will have to wait & see on that.

[86FUBAR]

ya i did the doit yer self stuf and it works well but not any thing like the pro job

[comanche-man22]

yeah my friend attempted the do it yourself liner and messed up the order of it so he stopped after messin up the tailgate :D

have you guys heard of line-X? thats what i plan on doin to mine but not over the edges and its only 100 bucks :brows: plus the thickness and i'll prolly go 3/16 to a quarter inch so I'm figurin about the 200 area...thats nuts still :nuts:

 

but yeah looks good...and one Question...how did you keep your truck so damn clean cuz it looks hella good!

[87manche]

line-x is real good stuff.

 

it's like rhino lining with a bit of powdercoating tech thrown in.

They spray it hot, and they ground the body, and put a charge on the line-x itself.