ggcnash Posted July 20, 2015 Share Posted July 20, 2015 Hi guys just wondering how far the JCR rear bumper hangs down, to find out if I do a little modification could I use my factory drawtite hitch? Link to comment Share on other sites More sharing options...
daking Posted July 20, 2015 Share Posted July 20, 2015 Here is one I modified. Image Not Found Image Not Found Image Not Found Image Not Found ----------- You can grind and cut out an opening for your hitch, really easy Link to comment Share on other sites More sharing options...
87Warrior Posted July 20, 2015 Share Posted July 20, 2015 A factory hitch will not work with the JCR bumper without modification. The JCR bumper sits higher and tighter than a stock bumper. I imagine you could modify a universal hitch to mount below the JCR. If you replace the receiver provided by JCR with an actual receiver hitch (I used Curt) the bumper makes for a solid towing point. Link to comment Share on other sites More sharing options...
johnj92131 Posted July 20, 2015 Share Posted July 20, 2015 A factory hitch will not work with the JCR bumper without modification. The JCR bumper sits higher and tighter than a stock bumper. I imagine you could modify a universal hitch to mount below the JCR. If you replace the receiver provided by JCR with an actual receiver hitch (I used Curt) the bumper makes for a solid towing point. What am I missing here? If the JCR bumper is higher and tighter than the stock bumper - the Drawtite bolt on hitch will still bolt to the frame just fine. It just will not bolt to the non factory bumper at the center of the bumper, right? Link to comment Share on other sites More sharing options...
ggcnash Posted July 20, 2015 Author Share Posted July 20, 2015 Think I might just build something like this, take some measurement to use drawtite hitch Thanks for the help guys Link to comment Share on other sites More sharing options...
87Warrior Posted July 20, 2015 Share Posted July 20, 2015 A factory hitch will not work with the JCR bumper without modification. The JCR bumper sits higher and tighter than a stock bumper. I imagine you could modify a universal hitch to mount below the JCR. If you replace the receiver provided by JCR with an actual receiver hitch (I used Curt) the bumper makes for a solid towing point. What am I missing here? If the JCR bumper is higher and tighter than the stock bumper - the Drawtite bolt on hitch will still bolt to the frame just fine. It just will not bolt to the non factory bumper at the center of the bumper, right? Correct., it would bolt to the truck. I estimate a stock receiver would hang about 4" below the bottom of the JCR bumper. In my opinion this does not work as the end result would look unfinished. If I feel ambitious after a hot day of work, i'll hold up my Valley hitch under the JCR bumper on my '86. Link to comment Share on other sites More sharing options...
ggcnash Posted July 20, 2015 Author Share Posted July 20, 2015 A factory hitch will not work with the JCR bumper without modification. The JCR bumper sits higher and tighter than a stock bumper. I imagine you could modify a universal hitch to mount below the JCR. If you replace the receiver provided by JCR with an actual receiver hitch (I used Curt) the bumper makes for a solid towing point. What am I missing here? If the JCR bumper is higher and tighter than the stock bumper - the Drawtite bolt on hitch will still bolt to the frame just fine. It just will not bolt to the non factory bumper at the center of the bumper, right?Correct., it would bolt to the truck. I estimate a stock receiver would hang about 4" below the bottom of the JCR bumper. In my opinion this does not work as the end result would look unfinished. If I feel ambitious after a hot day of work, i'll hold up my Valley hitch under the JCR bumper on my '86. That's what I was afraid of would love to see a pic though for reference Link to comment Share on other sites More sharing options...
krustyballer16 Posted July 20, 2015 Share Posted July 20, 2015 i don't know if this helps any... this is a "stock" bumper i built. same dimensions as factory. and also a factory hitch i built. same dimensions as factory. top of my bumper to bottom of receiver is 11" bumper is about 8" tall. unless the drawtite hitch hangs really low or the JCR bumper is only 4" tall, there shouldnt be 4" difference between bumper and hitch. should be as close as mine is or the bumper will be too tall... unless I'm totally not understanding the question. Link to comment Share on other sites More sharing options...
ggcnash Posted July 20, 2015 Author Share Posted July 20, 2015 i don't know if this helps any... this is a "stock" bumper i built. same dimensions as factory. and also a factory hitch i built. same dimensions as factory. top of my bumper to bottom of receiver is 11" bumper is about 8" tall. unless the drawtite hitch hangs really low or the JCR bumper is only 4" tall, there shouldnt be 4" difference between bumper and hitch. should be as close as mine is or the bumper will be too tall... unless I'm totally not understanding the question. Unbelievable fab skills on that bumper BTW, but I believe I understand what he is saying the bumper is not a step bumper like yours or oem so it doesn't come out as far and doesn't come down as low if that makes sense therefore, leaving the hitch like yours and mine sticking out past and further down which would look like crap if that's the case. Would probably be functional though just an eyesore. Link to comment Share on other sites More sharing options...
ggcnash Posted July 20, 2015 Author Share Posted July 20, 2015 Or this Link to comment Share on other sites More sharing options...
88whitemanche Posted July 20, 2015 Share Posted July 20, 2015 I don't have the jcr bumper but my uncle built me one similar to the stock bumper with the hitch at the bottom Link to comment Share on other sites More sharing options...
ggcnash Posted July 20, 2015 Author Share Posted July 20, 2015 I don't have the jcr bumper but my uncle built me one similar to the stock bumper with the hitch at the bottom I like it Link to comment Share on other sites More sharing options...
87Warrior Posted July 21, 2015 Share Posted July 21, 2015 For those inquiring minds. JCR DIY bumper with a MJ Valley hitch clamped into position. I certainly would not chop up an MJ specific hitch to make it fit snug to the JCR bumper. Link to comment Share on other sites More sharing options...
ggcnash Posted July 21, 2015 Author Share Posted July 21, 2015 Thanks, warrior great pics exactly what I was wondering! Link to comment Share on other sites More sharing options...
johnj92131 Posted July 21, 2015 Share Posted July 21, 2015 Excellent pictures in this thread. Thanks to all who posted pictures. I am going to bookmark this thread for future questions about hitches and bumpers! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now