Jeep Driver Posted December 25, 2014 Share Posted December 25, 2014 I need to replace the fender liners in the front. Rockauto has a pair for the '94 XJ at a reasonable price. Have any of you used these? or do you have a direction you can point me in? Thanks. Part Price Quantity Total 1994 JEEP CHEROKEE 4.0L L6 Body : Inner Fender VARIOUS MFR # CH1248106 {#55175009} fender liner; Left Front fender inner panel $8.76 $8.76 VARIOUS MFR # CH1249106 {#55175008} fender liner; Right Front inner panel $10.42 $10.42 Subtotal $19.18 Shipping : Ground (2 to 6 business days, You should receive by January 5) Shipping $13.61 Please allow one business day for our warehouse to process your order, plus transit time for selected shipping method, plus any delay shown above for non-stock items or outlying warehouses, before expecting your order to arrive. "Receive by" dates are best estimates considering these factors but are not guaranteed. Total $32.79 Link to comment Share on other sites More sharing options...
benjy_26 Posted December 25, 2014 Share Posted December 25, 2014 Nice. Thanks for the heads-up. Do you know of anyone who makes the rear liners? I ripped one of mine off lately. :-/ Link to comment Share on other sites More sharing options...
Jeep Driver Posted December 26, 2014 Author Share Posted December 26, 2014 Ordered, I'll let you all know how they fit. Also ordered my carpet from Stock Interiors :) Link to comment Share on other sites More sharing options...
ScottJeep Posted December 27, 2014 Share Posted December 27, 2014 Looks to be a pretty good deal. I lucked up on a JY run and snagged a pair from a 87 Wagoneer that appeared to be fairly new with really good rubber flap pieces on the front edge. I think I paid $6.00 each for them. Link to comment Share on other sites More sharing options...
Jeep Driver Posted December 27, 2014 Author Share Posted December 27, 2014 I look each time I go to the PnP, most are worse than mine. Link to comment Share on other sites More sharing options...
HOrnbrod Posted December 27, 2014 Share Posted December 27, 2014 I installed a pair like those about 3-4 years ago. They fit pretty well. IIRC, I had to punch a couple of new holes that no amount of wrestling could line them up. It's best to use new 1/4" punch pins (plastic rivets similar to what's there now) with a 1/4"ID x 1"OD fender washer on each pin since the holes were a little large. They still look like new and have not deteriorated at all. Link to comment Share on other sites More sharing options...
Minuit Posted December 27, 2014 Share Posted December 27, 2014 Every time I do something under mine more of that fender liner crumbles in my hands. Looks like I know what I'm getting soon. How hard were they to install? Link to comment Share on other sites More sharing options...
HOrnbrod Posted December 27, 2014 Share Posted December 27, 2014 Not difficult, but be prepared to break a few fender flare bracket studs. Link to comment Share on other sites More sharing options...
rustybottoms88 Posted February 28, 2015 Share Posted February 28, 2015 how did these fit for you Jeep Driver? I pulled the round ball vac resevoir off the other day and i pulled buack the rubber flap back to get to it the inner fender began to disinnegrate. If you were happy with these I will order me a pair. The price certainly is right. Link to comment Share on other sites More sharing options...
Jeep Driver Posted February 28, 2015 Author Share Posted February 28, 2015 Tolerable but the fit is crap. I'll fix this when I take the flares off for paint. Image Not Found Link to comment Share on other sites More sharing options...
madmax Posted November 11, 2015 Share Posted November 11, 2015 I need front liners for my 1988 sport truck, 2.5 4 cylinder. Will the 94 liners mentioned above work for me? Thanks! Link to comment Share on other sites More sharing options...
HOrnbrod Posted November 11, 2015 Share Posted November 11, 2015 I need front liners for my 1988 sport truck, 2.5 4 cylinder. Will the 94 liners mentioned above work for me? Thanks! Yes. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now