17" Rogue Rims On 88 Comanche

[Big By Fahr]

I have five good rims with great tread that I would like to use on my 1988 Comanche. If I use wheel adapters to get the correct bolt circle will p235/65R17's fit without rubbing? Figure rims will be pushed out 1.25-1.5 with adapter. Any help would be greatly appreciated.

 

Cheers,

Jim

[dasbulliwagen]

Not knowing the specs on the rims, I would say that you are on the right track. There is a thread on Naxja about using 17 and 18 inch rims form Chrysler 300 and dodge Chargers 2005 and newer. So I don't see why it wouldnt work. Show us some pics when done!

[earl*t]

Is this of any assistance? http://comancheclub.com/topic/12649-earlts-89-eliminator/?p=383404

[Big By Fahr]

The rims are 2002 rogue from my overland.

[MJRemi]

The Charger/Magnum/300 rims will fit but are not exact bolt pattern distance. They are off by a few mm. I don't know if that has any ill effect regarding long term use, or not. The Dodge Caliber has stock 17" & 18" with the 5x4.5" bolt pattern but I haven't checked the backspacing for compatibility yet. If they work, I'm going to lean towards those for the correct bolt pattern.

[shelbyluvv]

They are 5x5 lug pattern. They will not work without adapter/spacers.

[Big By Fahr]

Does this help?

 

My post says using adapters (5 on 4.5 to 5 on 5).  Wheels are rogue Jeep Grand Cherokee Rims total dia is 29" with a 9.3 section width. The adapter is 1.25" thick.  From WJ siteAll 17x7.5" Wheels:    Backspacing = 6.25"   Offset = 50.8mm    Bolt pattern = 5x5 (5x127mm)