Big By Fahr Posted March 31, 2013 Share Posted March 31, 2013 I have five good rims with great tread that I would like to use on my 1988 Comanche. If I use wheel adapters to get the correct bolt circle will p235/65R17's fit without rubbing? Figure rims will be pushed out 1.25-1.5 with adapter. Any help would be greatly appreciated. Cheers, Jim Link to comment Share on other sites More sharing options...
dasbulliwagen Posted March 31, 2013 Share Posted March 31, 2013 Not knowing the specs on the rims, I would say that you are on the right track. There is a thread on Naxja about using 17 and 18 inch rims form Chrysler 300 and dodge Chargers 2005 and newer. So I don't see why it wouldnt work. Show us some pics when done! Link to comment Share on other sites More sharing options...
earl*t Posted March 31, 2013 Share Posted March 31, 2013 Is this of any assistance? http://comancheclub.com/topic/12649-earlts-89-eliminator/?p=383404 Link to comment Share on other sites More sharing options...
Big By Fahr Posted March 31, 2013 Author Share Posted March 31, 2013 The rims are 2002 rogue from my overland. Link to comment Share on other sites More sharing options...
MJRemi Posted April 1, 2013 Share Posted April 1, 2013 The Charger/Magnum/300 rims will fit but are not exact bolt pattern distance. They are off by a few mm. I don't know if that has any ill effect regarding long term use, or not. The Dodge Caliber has stock 17" & 18" with the 5x4.5" bolt pattern but I haven't checked the backspacing for compatibility yet. If they work, I'm going to lean towards those for the correct bolt pattern. Link to comment Share on other sites More sharing options...
shelbyluvv Posted April 1, 2013 Share Posted April 1, 2013 They are 5x5 lug pattern. They will not work without adapter/spacers. Link to comment Share on other sites More sharing options...
Big By Fahr Posted April 1, 2013 Author Share Posted April 1, 2013 Does this help? My post says using adapters (5 on 4.5 to 5 on 5). Wheels are rogue Jeep Grand Cherokee Rims total dia is 29" with a 9.3 section width. The adapter is 1.25" thick. From WJ siteAll 17x7.5" Wheels: Backspacing = 6.25" Offset = 50.8mm Bolt pattern = 5x5 (5x127mm) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now