Keyav8r Posted November 9, 2012 Share Posted November 9, 2012 Gotta vent. Went by P&P today to check on new arrivals. XJ with AX-15 - some moron pulled the trans just to take the shifter. Looks like he did it with a hammer and chisel, left the crossmember hanging by one bent bolt. Even tore up the shifter boot instead of taking it off. I really could have used the whole thing - external slave! Link to comment Share on other sites More sharing options...
Geonovast Posted November 9, 2012 Share Posted November 9, 2012 You don't need the whole thing for the external slave stuff. Go back and grab the bellhousing, clutch fork, and bearing retainer. Link to comment Share on other sites More sharing options...
ftpiercecracker1 Posted November 9, 2012 Share Posted November 9, 2012 don't you also need the Clutch master? Link to comment Share on other sites More sharing options...
jimoshel Posted November 9, 2012 Share Posted November 9, 2012 My biggest gripe is the Dorks that tears up a $100 worth of parts just to get a $1 item. Stupid, lazy inconsiderate MF'S.< and yes, that means just what you think it does. Link to comment Share on other sites More sharing options...
Geonovast Posted November 9, 2012 Share Posted November 9, 2012 It certainly wouldn't hurt to grab the master/slave, but I didn't mention those because that can be bought new. I would see if you can get the whole thing for cheap though, as there's a good chance the trans is shot. Also grab that crossmember, AX-15 ones are getting harder and harder to find. Link to comment Share on other sites More sharing options...
Keyav8r Posted November 10, 2012 Author Share Posted November 10, 2012 Will the bell housing, etc work with my BA-10? I'll probably go back for those parts and the crossmember on the chance I may find an AX-15 somewhere down the road. Jim - I totally agree with your description of these JY rats. By the way, did you return the bus or just leave it on the side of the road after wiping off you fingerprints? Link to comment Share on other sites More sharing options...
Eagle Posted November 10, 2012 Share Posted November 10, 2012 don't you also need the Clutch master? Yes, but would you trust a used one? Those can be bought anywhere. Link to comment Share on other sites More sharing options...
Comanche County Posted November 11, 2012 Share Posted November 11, 2012 What was so trashed about it? You can get just about any part from Novak or Advance Adapters. Link to comment Share on other sites More sharing options...
Geonovast Posted November 11, 2012 Share Posted November 11, 2012 He's implying it's trashed because someone yanked the shifter and left the inside of the case exposed to the elements. Although, if it had a good amount of oil in it yet, it may have survived and just needs to be cleaned out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now