91dieseljeep Posted December 16, 2011 Author Share Posted December 16, 2011 Got some more done on the radiator hoses. I had to modify the thermostat housing and put the inlet on the opposite side. modified thermostat housing thermostat housing installed lower radiator hose I'm working on the heater hoses next and will post pics when they are done. Link to comment Share on other sites More sharing options...
91dieseljeep Posted March 23, 2012 Author Share Posted March 23, 2012 Finally got some time to work on this project some more. Built some custom fuel line fittings Got the fuel lines all ran Got the clutch all hooked up with a stainless line Will be building a snorkle for this since i have to do a custom intake anyways. The start of the snorkle My inline air filter for the snorkle I couldnt figure out how to get rid of both the tranny computer and the ecm so i ordered a complete Painless Wiring harness Link to comment Share on other sites More sharing options...
ejndssn Posted March 25, 2012 Share Posted March 25, 2012 post the results of the performance mpg and any additional upgrades to enhance the performance :brows: Link to comment Share on other sites More sharing options...
91dieseljeep Posted June 8, 2012 Author Share Posted June 8, 2012 Have been wheeling a few times hers a few pics of it. Mandatory flex shot Me standing by it it runs great and I'm very happy with how it performs Link to comment Share on other sites More sharing options...
Tux_Fan Posted June 8, 2012 Share Posted June 8, 2012 I originally bought my '89 to do the OM617 swap to. I decided not to do it as when I bought the truck it only had 130k miles... When I get out of school I will probably swap one in... Anyway, awesome work. Very clean swap if I do say so myself. Do you have any idea on what your costs were for the swap? Stephen Link to comment Share on other sites More sharing options...
sinkrun Posted June 14, 2012 Share Posted June 14, 2012 Great job and great skills :bowdown: Link to comment Share on other sites More sharing options...
91dieseljeep Posted January 9, 2013 Author Share Posted January 9, 2013 Doing an update on this its been a while since I have posted anything. Have been working on narrowing a early Ford hi pinion Dana 44 for the front of my jeep. Dana 44 engine bay Built some fenders Out wheeling Link to comment Share on other sites More sharing options...
mpace6a Posted July 7, 2013 Share Posted July 7, 2013 Bookmarked this a while back, any updates on your rig? How its running, hp/torque numbers, mileage? Link to comment Share on other sites More sharing options...
XJGPER Posted July 9, 2013 Share Posted July 9, 2013 Holy smokes this is awesome, would like to know specs on the motor and fuel economy. Is that Eagle Creek up by Murray i spy in a few photos up? Link to comment Share on other sites More sharing options...
jeeping88 Posted June 10, 2014 Share Posted June 10, 2014 Hey, 91dieseljeep, I just did same swap got it running tonight. The engine shakes whole truck...alot! How much does yours shake and rattle? Thanks Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now