HOrnbrod Posted December 11, 2006 Share Posted December 11, 2006 Can anyone take a peek under their stock MJ and tell me which way the shackles are facing? Open end forward or toward the rear? Installed my new metric ton springs last weekend and forgot to mark them. Yes, stupid I know............. Thanks; Don Link to comment Share on other sites More sharing options...
pingpong Posted December 11, 2006 Share Posted December 11, 2006 the opening faces towards the front Link to comment Share on other sites More sharing options...
HOrnbrod Posted December 11, 2006 Author Share Posted December 11, 2006 Thanks Pong - figured I'd do it wrong. I have the open side facing backwards. Does it matter? Everything seems okay. Link to comment Share on other sites More sharing options...
Bounty Hunter Posted December 11, 2006 Share Posted December 11, 2006 Without looking at mine, the shackle center section might bind against the leaf spring under full compression of that spring. Link to comment Share on other sites More sharing options...
DirtyComanche Posted December 12, 2006 Share Posted December 12, 2006 That's the reason they're shaped that way. You're more of a street guy, eh? Probably won't be a problem.. Link to comment Share on other sites More sharing options...
HOrnbrod Posted December 12, 2006 Author Share Posted December 12, 2006 Yeah, all street at this point. Had a brain fart when putting the original MJ shackles on backwards. I had some TeraFlex extended shackles on to even up the rear with the front after installing OME front coils previously, but was getting more body roll than I wanted with them, probably because I'm carrying the heavy camper shell. So I sucked it up and put on new metric ton spring packs to compensate for the camper. I didn't want too much lift in the rear with the new packs; the goal was 2" maximum. Ended up netting 1-1/2" using the original MJ shackles, so it worked out okay. It's a very slightly stiffer ride in back, but feels much more secure w. basically zero body roll, so I'm happy. Expect these springs to settle perhaps 1/2" when broken in. So I ended up with an almost perfect 2" - 2-1/2" F/R lift as compared to the original factory specs. Next up will be 31" tires after I wear out the 235/75/15 on it now. I think I should have enough clearance for 31s now?? Link to comment Share on other sites More sharing options...
Pete M Posted December 12, 2006 Share Posted December 12, 2006 Some 31s fit on stock 4x4 MJs if you stick with stock rims. Some rubbing on the control arms is possible at full turn. Link to comment Share on other sites More sharing options...
HOrnbrod Posted December 12, 2006 Author Share Posted December 12, 2006 Thanks Pete. Plan on sticking with the 8" wide 15" ZJ rims I have on now, so I think I'll be okay. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now