Darren Posted June 21, 2010 Share Posted June 21, 2010 I ran the JKS Quicker Disconnects on my MJ and loved them, but they aren't cheap. I made these for about $40. I think I'm going to redo the bracket on the swaybar, but other than that I'm real happy with how they turned out. It's amazing how short stock links really are. Link to comment Share on other sites More sharing options...
sinkrun Posted June 22, 2010 Share Posted June 22, 2010 Very Nice work! Link to comment Share on other sites More sharing options...
KYMJ Posted June 22, 2010 Share Posted June 22, 2010 Very nice! Link to comment Share on other sites More sharing options...
Oizarod115 Posted June 24, 2010 Share Posted June 24, 2010 how tough is that L bracket? might consider boxing the sides looks like a nice setup other than that i've been pondering how to make my own too. Link to comment Share on other sites More sharing options...
pitbull4x4 Posted June 24, 2010 Share Posted June 24, 2010 looks good!!!!!!!!!!!! Link to comment Share on other sites More sharing options...
CWLONGSHOT Posted June 24, 2010 Share Posted June 24, 2010 GOOD JOB!!! :cheers: CW Link to comment Share on other sites More sharing options...
Darren Posted June 24, 2010 Author Share Posted June 24, 2010 how tough is that L bracket? might consider boxing the sides looks like a nice setup other than that i've been pondering how to make my own too. I'm not happy with the angle iron bracket up top either. I wanted to make it double shear and mount the top of the link directly below the swaybar. Being at stock height the angle from the axle bracket to directly underneath the bar would have been too steep, so I had to put it just outside the bar on either side. If you have 3" or more of lift, the angle would be better, and I assume you could move it to directly below the bar. Like I said in the OP I'll be redoing the swaybar side bracket. Thanks for all the compliments guys. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now