tire size......agian.

[smithe1811]

anyone running 33's with a 4 inch lift? just need to know if they fit without rubbing the fenders. i already know they will on the LCA's since my 31's do that.

[Pete M]

33 by what?

 

what control arms do you have?

[smithe1811]

33x12.5x15 with stock LCA's...for now. i have stock steel rims.

[mvusse]

I ran 33x12.50s for a few weeks with 4.5" and adjustable upper and lower control arms. It was almost impossible to get it adjusted to clear both the front and the rear of the fenders while steering in parking lots.

 

Adding 1.75" spacers made a world of difference.

[JeepcoMJ]

33x9.50's *might* fit a little bit better than anything else. 33x10.50's won't.

 

you will need to trim a little to make it fit.

[Pete M]

what gears are you running? any plans for strengthening the drivetrain?

[mnkyboy]

I have 33X12.5X15s with stock control arms and 5" lift.

 

they rubbed pretty bad till i did some trimming at the rear of the wheel well

 

It works but its not an ideal setup

 

[LEAD_NOT_FOLLOW]

33x12.5 on a 3.5" RE lift on the wife's XJ (yeah I know it's an XJ, but the front suspension/fenders are the same). Sorry but I don't agree with 95% of the statements above; you don't need large amounts of lift or lots of trimming to fit them. Running stock flares (not relocated) and VERY minimal amount of trimming.