jeepsouth

Me neither ,guess i got lucky when i found it. :banana:

O.k. the first one is...

Here are some pics- hope they show up! :waving:

1987Comanche, i'm in Summerville,about a 20 min. ride up I-26 from Charleston. I did not have to replace the stalk as this delay works independently. Simply plugged in between harness from my stalk switch to harness under dash. The instructions say that it works with "standard wiper wash system only" (base truck) it is a on/off control knob,and delay module combo that mounts under dash. when you rotate the knob to the right to turn it on it starts the wipers at a fast delay ,and the more you rotate it the slower the delay. The wipers stroke fully ,and park at a rate i control! Oh and the stalk switch still works as it did before off,low,high. Will get some pics later today. :cheers:

Bought a new old stock part# 8982200325 wiper delay for 84-87 cherokee off ebay,and installed on my mj-works great. Any body else have on of these? :cheers:

I would think an auto glass co. could help you out with a replacement pane. :cheers:

Yes weight loss is a proven way to go faster. But what to remove? :dunno:

If your measurments are good draw it on with the bolt.

Yes try the longer bolt. :cheers:

Installed two euramtec replacement lights today. Easy,and look/work great. Got the discount from ebay seller (two for price of one) as others have done also.

Decided that the slope of my driveway was exaggerating the rake. I'll not be installing any lift front or rear. the 30" tires make it a little hard for my wife,and daughter to get in ,and this is my daily driver now that i need to work on the mustangs rear axel etc. :wrench:

Yes much cheaper. I used 5/16" x 1/4" seal size by the way ,but 5/16 x 5/16 would provide a tighter seal against the glass if that size is available. :dunno:

ok this is as big as i can get it. :mad:

hopefully this will be a larger pic. :waving:

I had rotted forward window channel seals like alot of you do. So i decided to do something about it. Simply removed the bad channel seal down to just below where it comes out of the door,cleaned the area where it was with rubbing alcohol,and used stick on weather strip that can be bought at a hardware store. Put it on the left,and right sides of the forward channel not the back.here is a pic if the link will work. :cheers:

dasbulliwagen, yeah i figured an alignment would be in order also. just got some 30x9.5x15 destination a/t's on my cherokee sourced (15x7) canyons so wouldn't want to chew em up fast. :no:

Ok then i'll take some measurements ,and go from there. :cheers:

Thanks for the info Eagle. Will the 2" spacers in the front level out a stock 4wd? :cheers:

I'd like to know also. :cheers:

Burped air from cooling system,and looked at replacing the muffler back on the exhaust system. :clapping:

TEST