BrownBetty85

I'm in the San Antonio area and will have a set of axles w 3.08's soon if interested

Good luck with that I'm doing pretty much the same but motor and all so I have entire wire harness to do also but have done before the donor XJ was the receiver 7 years ago for 93 into an 85. Oh this addiction can make you a gluten for punishment!!

Good luck with that I'm doing pretty much the same but motor and all so I have entire wire harness to do also but have done before the donor XJ was the receiver 7 years ago for 93 into an 85. Oh this addiction can make you a gluten for punishment!!

What year tail lights are you using from the Camry? Thanks

The FF at the end is a double sealed bearing if that helps at all

Love the tech lesson guys. Great job and information

One needs regluing as it is. Wast to throughly clean and repaint the silver backing. Just trying to get the best out of what I have to work with. Really glad I joined this club. Lots of great info and friendly help. The kind of stuff that makes the world go around!!

Thanks Pete I will give that a shot. One already worked most of its self loose so that shouldn't be a prob but REALLY don't want to break the lense just paid $140 for them!

Does anyone know how to separate tail light lenses from housings? Thanks

Most of those bearings are 204ff. If you have no luck I have one of those brackets and pulley available will let go very cheap( make offer) plus freight. I'm near San Antonio, Tx

Yeah finally picked up my "barn find". It's an 89 Comanche 4x 4.0 with 5 sp( let's see if it'll hold up for a while). Not a low mileage by any means and has a bad motor. The owner was going to put a 4.3 in it and hacked( literally) the wiring harness. Well good thing I have a donor XJ. Was building a rock crawler after an idiot pulled out and Tboned him. Well after a few years of working on it and some pretty good mods under it I realized how much I miss it on the road. Always said the only thing I would get rid of the XJ for would be a MJ. We'll meet another gear head at a birthday party and told me about a truck his dad wanted gone. Long story short $400 and it's mine!!

Had 85 XJ 2.5 4 speed and adapted a Weber 2 bbl and put MSD ignition and a free flow exhaust. 3.73's w 31's and did amazingly well especially considering had 300k on the odo. Pulled a 16' w an XJ on it. Didn't set any bonneville records but did keep up w traffic!

Have 1 ton OTK and seems to roll around a bit. Great info will be getting one myself. New member here and exactly why I joined! Thanks

I will be picking up an 89 with a 5sp. Some issues w the motor so pulling drive train for '93 HO. If you still need the TPS in a few weeks message me and just pay for shipping I'll have no use for it. Had XJ's for years and finally getting an MJ (whew whoo!). So new to this sight for the great tech info and perhaps a few parts.