CGCWO

So I open this page and to my surprise find a truck with almost the exact paint scheme I am going for on my 89 SWB 2.5L 4spd 2wd. Mine will be gunmetal gray metallic over black rockers, flares and header. Image Not Found

Found the console, thanks to fellow CC members!!!!

I am still looking for a center console.

Had this same problem, turned out when the PO took out the radio or when I installed the new one the lines on the top/back of the actual AC/Heater/Vent controls were disconnected, prob form something pushing against them.

Thanks that thread was very useful. Got it fixed today, still not just like I want it, its all hooked up fro now.

I'll have to look, prob need more tubing to reach that far.

Okay I am at a loss. 89 2.5L TBI with two vent hoses off the valve cover. Noticed the rear (smaller 1) is melted from where it ran down near the rear of the exhaust manifold. Where should this be connected to? Thanks in advance.

On my 89 2wd, I used 1.75 inch spacers and got with-in 1/8th of an inch on all four corners (top of tire to bottom of fender flare edge).

Almost ready for paint.

New rear cab panel, JK floor mats.

Still looking...

And it is the same blue as the other blue trim and rims, shadows make it look black.

Not missing, just painted.

Well the good news is that they will be going in a 2wd 2.5L and they are not the lightest weight JK coils. I took them out of my JK they are #14's, put #17's in the JK and gained almost 1.75 inches on the JK. Who knows if the ones I have don't work out maybe I'll look for a set of #17's, #18's or #19's.

Thought you folks might like this!!!! It's owned by the resort I work at and used for special events and weddings.

Not really looking for any more lift, looking for better ride. Four year old coils veres 25 year old coils, not to mention better spring rate should improve the ride. With the spacer I already have, a .5 inch additional lift would be a bonus.

replied to PM.

I have a 2 front quarter panel emblems.

Just wondering if anyone has attempted using a set of JK Front Coils on a MJ? The JK front coils come in 6 different spring rates going from last two of the part# 13 thrugh 19. I have a set of JK take offs from a 2 door last two of part# 14. May give it a shot, I know they are quite a bit taller than the MJ spring, but a visual comparison looks like they will work. Question is what will be the lift gained. I currently have stock MJ 2wd coils with 1.75 in coil spacers.

KKlimer, I found one from another forum member. Thanks for the reply though.

Ken Block was driving a purpose built 1965 Mustang/AWD...the way we all pinch pennys around here I am sure we wouldn't even want to know the price tag on that thing.

PM sent.

Some one should grab that rear window and rear bumper. Wish I was closer....

Thanks for the info...I am overdue for a trip to the local pick and pull. Need a few items that I am sure I can find there and save on shipping. Had a couple of lines on the pieces from a couple of different CC members, but couldn't justify paying the outrageous shipping for these large parts.

I am looking for the interior panel for below the rear window and the carpet panel for the back of the cab. Any color will do, I am pretty handy with paint and dye. Thanks!