Backdraft

Bumper was looking bare....

Very welcome!

Brent, give me a week or so to make it down to the property and check my old 4.0. I know it has the boot, just not too sure how flexible it still is.

http://www.glasswarepro.com/4501036-ite ... _Four.aspx This is where I got the rear window from. It is MJ specific.

Oh, the anticipation! Can't wait to see it finished out. Tell your paint guy to hurry up! LOL

Safelite also replaced the old solid rear window with the faded purple tint that was rubbed through with a C.R.Lawrence rear slider. And it's finally legal!!

Well folks, I guess it's time to make a few updates. Replaced the rusted chrome lugnuts with black gorilla nuts. Safelite came out and replaced the old windshield. 97+ rubber trim installed

Holy run on sentance Batman!

I have a question for those of you who have a rear slider from C. R. Lawrence. Did any of you run into a fitment issue? I just had mine put in today by Safelite, and the top and bottom of the window frame didn't fit flush against the rear of the cab. Looking at the rear window and frame, it is straight as an arrow. Looking at the cab of the truck, it has a slight curve from top to bottom where the back glass goes. The slider is in and is sealed up just fine. It just doesn't fit flush from top to bottom and is annoying from an aesthetic point of view.

Color preference? Mike

Let me check, but I think I have all the stuff you're asking for. I'll get back to you tomorrow. Mike

Put new lug nuts on it. Mike

This is Sanchez..........he's dirty.

No big deal Ryan. Thanks for looking. Mike

You wouldnt happen to have a green 39 tooth short shaft laying around, would you? I need to do this to correct my speedometer for 33s and 4.56s. Mike

Pay for shipping and they're yours. Paypal would be fine. Ill clean them up tomorrow and find out what shipping would be at the ups store. Pm me you physical addy and ill get started on it tommorow. Mike

lol i was going to mention this, and by the time i got to the bottom of the page, i noticed you already beat me to it :P Wow, how bout that. My truck has a twin out there! You have nice looking truck, and good taste....lol.

Brett, are these the brackets you're talking about? If so, I have a set that I removed when I installed the long arms. Mike

Thought I'd pull her out of the garage and let the sun shine down for a bit. Here are a few shots as she sits now. More gratuitous photos. Mike

Well the bumper came in from JCR Offroad. Took it to the local powdercoater and he had it ready for pickup in 2.5 hours... HOORAAAYY BEER!!!! Mike

So, where can I get a body lift for my Commancheee? Mike

Final bushwhacker installed today! Mike

And todays Installation was brought to you by Breckenridge Small Batch 471! Exxon, the beer sponsership was your idea. I figured since we are both in texas and both like good beer, I'd toss up a flag for you. Glad you noticed and commented! Brett, That compressor is a Husky 30 gallon oiless. And I'm starting to agree with you. I was skeptical at first, but now that iI see the Bushwhackers on the Comanche, I really like the look of them. Ryan, The install is easy and really straightfoward. They include instructions to idiotproof it. But really all you have to do is trim the wheel well a little bit, set the flare up against the body, mark the holes, drill them, and install. They come with a rubber self adhesive trim/weatherstripping that you have to put on the flare itself, but its cake. As you can see from the pics, I put masking tape along the fender, and used a screwdriver to mark the holes by scratching the tape in the appropriate spots, then drilled, then removed the tape. Hope that explains it. Mike

I had a spare half hour this evening and finished putting the front drivers side bushwhacker on. Mike

I almost forgot and jinxed the whole thing! Todays progress was proudly brought to you by Hawaiis own Kona Brewing Companys Longboard Lager. Went to Hawaii last summer and this stuff was everywhere. In 10 days, I must have had 5 gallons of it. And as luck would have it, my local beer supply has recently started stocking it. Ok, back to the build. Mike