Automatic to Standard, 2x4 to 4x4

[a34upw]

Will there be a cover on the floor where the stick shift, and 4x4 lever go? I'm converting my 88' 2x4 to 4x4, it has new axles out of an 87', new engine, but my 88' is auto which will become a stick 4x4, so will there be a cover in the floor where the shifter goes, and 4x4 lever?

[jtdesigns]

my 89 has the 4x4 plate,,, and its 2wd... I'm pretty sure the holes are the same size for auto and stick too..

[HOrnbrod]

my 89 has the 4x4 plate,,, and its 2wd... I'm pretty sure the holes are the same size for auto and stick too..

 

Likewise on my 91. I think this was SOP from 87 on.

[a34upw]

thanks guys

[MF Steve!]

Even the '86 had the punch outs for both. Regardless of automatic or manual, the hole in the tranny tunnel is the same shape and size, as is that of the t-case shifter.

[Geonovast]

The hole for the handle is there, however the holes for the linkage bracket will need to be drilled out. There are dimples.

[a34upw]

alrighty, does anybody know where i can find a new floor, just the carpet, or vinyl? it currently has blue carpet, and i am switiching it to a tan interior, so i thought maybe vinyl would be good, but i've only had luck finding it in one spot, which i don't remember, but it was like over $250

[Eagle]

Even the '86 had the punch outs for both. Regardless of automatic or manual, the hole in the tranny tunnel is the same shape and size, as is that of the t-case shifter.

Keep in mind that the size and shape of the hole changed. The hole for my '89 with AX-15 is different from the '87 with the BA 10/5.