Transmission Speed Sensor location (PICS)

[coolwind57]

I'm suspecting that the shifting issues of my AW4 auto may be caused by a bad speed sensor.  I'd already replaced and properly set a new TPS, I bought and replaced my TCU with a junkyard one, and my NSS is only 2-3 years old, so I'm feeling good that it is still good.  I tested my shift solenoids and they were all good.  My next move is to replace the speed sensor. 

 

I recently bought a Standard Products SC129 speed sensor from PartsHawk like the one pictured. 

 

I was under the impression that the location of the speed sensor was behind the 4x4 shift bracket.  Man, that was a pain to remove.  Anyhow, I was either wrong on the location of I just have the wrong part.  The part under that bracket looks nothing like the SC129.  The part on my truck has what appears to be a rubber line running to it and no electrical connection at its base (see the end of my finger):

 

I've been looking all over the internet but I'm not really coming up with anything to solve my issue.  Anyone with experience swapping the speed sensor out?  I've scanned all over my AW4 transmission and I cannot figure out another location where SC129 would go. 

 

Is the part pictured at the end of my finger the actual speed sensor?  Do I have the wrong part?  Am I overlooking the area where the SC129 would go?

[llhat]

not sure if this thread will help, but gives on advice.

https://www.jeepforum.com/threads/aw4-troubleshooting.4244314/

 

 

page 23 of this pdf file may be or assistance

location in the adapter housing to transfer case (much later years it is on the output of the transfer case)

there's also test procedure (but i think this publication is actually for later vehicles)

 

https://cdn.xjjeeps.com/pdf/en-us/aw4-transmission-service-information.pdf

[coolwind57]

22 hours ago, llhat said:

not sure if this thread will help, but gives on advice.

https://www.jeepforum.com/threads/aw4-troubleshooting.4244314/

 

 

page 23 of this pdf file may be or assistance

location in the adapter housing to transfer case (much later years it is on the output of the transfer case)

there's also test procedure (but i think this publication is actually for later vehicles)

 

https://cdn.xjjeeps.com/pdf/en-us/aw4-transmission-service-information.pdf

Thanks for taking the time to respond.  I didn’t see anything on the transfer case.   I did see a guy on YouTube swapping one out and his was near the output of the transfer case.  Mine is not.  

[coolwind57]

I think I’ve just got the wrong part.

[Ωhm]

Crown automotive sales

[coolwind57]

8 hours ago, Ωhm said:

Crown automotive sales

Thanks Omn.  I did see this part as well, very different from the one that I purchased. I’m assuming I just purchased the wrong part even though application shows it is correct.  
 

I will purchase this and see what happens