Pete M Posted Monday at 02:21 AM Share Posted Monday at 02:21 AM after removing the rotted exhaust and drilling a 2" access hole in the side of my CRD Liberty's wheel well, I was able to use a Kobalt 3/8" bolt extractor to remove the rusty metric bolt that holds the CPS in. tomorrow I'll try replacing the CPS and then work on the new exhaust. Link to comment Share on other sites More sharing options...
eaglescout526 Posted Monday at 02:54 AM Share Posted Monday at 02:54 AM Those arent special like the Renix CPS bolts are they? Link to comment Share on other sites More sharing options...
Pete M Posted Monday at 03:33 AM Author Share Posted Monday at 03:33 AM looks like a standard torx bolt. it spent a decade in the salt and had nothing left of the splines. I intend to take it to lowes and see what exists in a stainless variety. Link to comment Share on other sites More sharing options...
eaglescout526 Posted Monday at 04:10 AM Share Posted Monday at 04:10 AM Sounds like a good plan! Link to comment Share on other sites More sharing options...
pizzaman09 Posted Monday at 09:41 PM Share Posted Monday at 09:41 PM Congratulations on getting the stubborn bold out. With torx, I have found that sometimes you can pound a 1 size larger torx bit into the hole and use it to drive out the bolt. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now