show me your rock sliders

[Fsj Super Swamper]

show me your rock sliders, I building some rock sliders with 2" tubing & I'm looking for mounting ideas.....

 

This is what I'm lokking at so far.......

[comanchekidwa]

I used 3x6 box tube 3/16 and cut out the stock rocker and welded in the box tube.....

Then I tied it into the frame...

[86FUBAR]

take a look at Pete's build thread he has a good setup

[Fsj Super Swamper]

u got a link...?

[feerocknok]

Hmm, don't really have any pics of mine that focus on the sliders.

1-3/4" tubing, you could use em as steps if you tried. 3 mounting mounting points (front, rear, and mid rear), they start 3" behind the flare and go back to 3" in front of the flare. They get dropped onto constantly and are constantly used as pivot points.

Just make sure your frame isn't rusted where you're mounting them or you'll have alot more work to do to get them structually sound.

[CWLONGSHOT]

http://comancheclub.com/forums/viewtopi ... ck+sliders

 

http://comancheclub.com/forums/viewtopi ... ck+sliders

 

Here is two threads I found in a quick search...

 

CW

[pingpong]

Check out my webshots link.. You can see the rails I had on Pong. They were 2x3x1/4 with 2x2x1/4 mounting legs. I had three mounts per side, plus a piece of 1x1x1/8 angle on the pinch seam.. . I used 3/8 self tapping bolts to mount the legs to the frame.