gconcilio Posted December 10, 2007 Posted December 10, 2007 How do I remove the trim strips around the windshield of an 88 Comanche so that I can reuse it?
Wildman Posted December 10, 2007 Posted December 10, 2007 The trim is just held in place with some plastic clips (that are some times in bedded in the sealant) just pry off the trim from the glass side/edge, and it will pop right off, start on the top piece, down the sides, across the bottom, and done ;)
DirtyComanche Posted December 10, 2007 Posted December 10, 2007 You'll probably find 3/4 of the clips will be garbage afterwards... Plan on getting a few more.
JeepcoMJ Posted December 10, 2007 Posted December 10, 2007 and, start along the sides first. the top piece is under the side pieces. remove the side pieces, then whichever one you feel like removing after that. the bottom is made of 2 pieces.
A-man930 Posted December 10, 2007 Posted December 10, 2007 was anyone able to get the clips back on? I just ditched them and used silicone (on the bottom one anyways...)
smithe1811 Posted December 10, 2007 Posted December 10, 2007 i started on the bottom in the middle and got mine trim off finefrom my 88.
DirtyComanche Posted December 12, 2007 Posted December 12, 2007 was anyone able to get the clips back on? I just ditched them and used silicone (on the bottom one anyways...) As long as they aren't broken, it'll all just snap back together. Normally they break when you pull the trim though, they just get too brittle after years of exposure.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now